Canadian Mustang Owners Club - Ford Mustang Forums

Canadian Mustang Owners Club - Ford Mustang Forums (https://www.cmoc.ca/)
-   5.0L (https://www.cmoc.ca/5-0l-36/)
-   -   Screwed by the government again (https://www.cmoc.ca/5-0l-36/screwed-government-again-8403/)

Stang Illusions 5.0L 04-17-2007 03:04 PM

Screwed by the government again
 
E-Test................?

Let me start off by saying the goverentment is a A$$hole and a money grabber!

Well I took my car in for a E-Test today and it failed!
It failed in the section No ppm my Limit was 0421, My car ran 661 :(

My symptoms are....."High NOx on Driving Test"
-Inoperative/ineffective EGR system
-Excessively lean air/fuel ratio
-Malfunctioning or missing catalytic converter (3-way catalyst only)
-Excessive spark advance
-Faulty Thermostatic Air Cleaner system
-Engine deposits or mechanical defect
-Faulty cooling system

Now lets have a look here......
My car is 94 GT stock (for now) but I am running 94 octane with 14* Advance timing. Should I put it back to stock 10* advance?
Also should I try and sneek out the spout?
I know my O2 sensors are new, My MAF is clean, I have a new air filter, and clean oil.

I also have a TwEECer RT but not yet installed, is there any way I can fack with the computer?

I could really use some help here.
Thanks everyone

Keith.

archer379 04-17-2007 05:06 PM

i would but the timing back and try a different shop some of them like to take advantage of people

94STANGR 04-17-2007 05:16 PM

Dude come to toronto and i'll pass your car no problem

Stang Illusions 5.0L 04-17-2007 06:09 PM


Originally Posted by 94stangr (Post 78935)
Dude come to toronto and i'll pass your car no problem

I think I have a connections on that as well, but if I don't can you PM me a price? ;)

Schlodes 04-17-2007 06:22 PM

Your timing is hurting you, set it to 8*, and add a couple litres of methyl hydrate to ~1/2 tank of fuel, make sure it is good and hot, it should pass.

Ponyryd 04-17-2007 08:56 PM

1 Attachment(s)
I would just set the timing to about 5deg and it should be good, like Schlodes says, the timing is hurting you.Attachment 23641

Captin Spalding 04-17-2007 10:38 PM

timing yes but you could go to far and that will hurt things as well
Back to 10* maby 8* but no further than that

94STANGR 04-17-2007 10:57 PM

Do exactly what these guys are saying, all I was going to do was retard your timing and put some methyl in it before I run it on the dynamometer. Should have no problems.

jibbijib 04-18-2007 03:06 AM

Guaranteed To Pass. Additive aisle in Canadian Tire.

StealthGT 04-18-2007 06:53 AM

if it dont pass, let me know keith, i'll swap out my new catted midpipe if needed, my address is.....hmmm....across the hall..LOL


All times are GMT -5. The time now is 07:21 PM.


© 2024 MH Sub I, LLC dba Internet Brands