asap need torque spec
 

i need the torque spec for the uper intake on a 99 v6 thanks

µ 2. Note:
Refer to the location note made during removal and make sure the bolts are installed in the correct location.

Install the upper intake manifold. Tighten the bolts in the sequence shown in three stages:

l Stage 1: tighten to 6Nm (53 lb-in).

l Stage 2: tighten to 8Nm (71 lb-in).

l Stage 3: rotate an additional 90 degrees.


http://i105.photobucket.com/albums/m...ke/tighten.jpg

great thanks that will help