General Mustang Tech & Chat This Forum is for General Mustang Tech that fits both suspension, exhaust, wheels, tires and more. General Mustang chat / banter is welcome as well.

Hood Scoop

Thread Tools
 
Old Jul 15, 2010 | 06:07 AM
  #1  
Red Stang's Avatar
Thread Starter
CMOC Rookie
 
Joined: Jun 2010
Posts: 53
From: Belle River
Hood Scoop

I was thinking of ordering a hood scoop for my 2006 GT. I looked into a factory ford scoop but they are $350 unpainted. American Muscle has them painted for $199 US plus shipping. I like the idea that it comes prepainted ready to be installed. Some of the reviews indicate they dont fit exactly right at the front. Has anyone had any experience with these aftermarket hood scoops?
Old Jul 15, 2010 | 10:54 PM
  #2  
SNAKEBITE's Avatar
I am the post KING
 
Joined: Feb 2005
Posts: 15,244
From: Calgary
No experience but I would want one that fits perfectly. Hopefully someone can help you and good luck
Old Jul 16, 2010 | 05:36 AM
  #3  
Apocalypse Pony's Avatar
Adminut
 
Joined: May 2009
Posts: 5,722
From: Maple Tree, Branch #2 above the rope swing
No experience with the hood scoop deal, but only advice I would give is that cheaper does not always equal better and as far as painting goes, I would have more faith in dealing with a local business than a mass produced part that would have to be shipped back if you had issues with a run, orange peel etc. Sometimes it's worth the cash to get something that fits right the first time - not saying the Ford stuff is always perfect, but I'd have more faith in the fit than something aftermarket, but that's just me. Same goes with having it painted at your local shop, especially if you have any sort of experience with them from work you had done before.
Old Jul 16, 2010 | 05:55 AM
  #4  
Red Stang's Avatar
Thread Starter
CMOC Rookie
 
Joined: Jun 2010
Posts: 53
From: Belle River
Hood Scoop

Thanks for the advice.
Old Jul 16, 2010 | 04:59 PM
  #5  
Apocalypse Pony's Avatar
Adminut
 
Joined: May 2009
Posts: 5,722
From: Maple Tree, Branch #2 above the rope swing
No problem dude, you can always get advice for the right price around here - FREEEEEEE!
Old Jul 16, 2010 | 08:28 PM
  #6  
VAEM's Avatar
Retired Admin
 
Joined: Oct 2009
Posts: 4,821
From: Barrie, Ontario
Were giving out FREE advise? When did this start? And WHERE'S THE MEMO???

(kidding of course)

I'd go with the Ford product. A bit more expensive but if the other one doesn't fit right you will have wasted your money - every time you look at it you'll get upset and may just end up taking the thing off in the end. You work hard for your money (at least I do) .. save up a little longer and get the good one.
Old Jul 19, 2010 | 09:32 PM
  #7  
Michael F's Avatar
CMOC Newbie
 
Joined: Mar 2010
Posts: 19
From: Montreal, Canada
I got one of those, I believe it`s a Roush but I could be wrong. The paint matching is quite good, however, the fitment could be better.
The bottom leading edges that contact the hood need to be filed for a flush fit.
Secondly, because there is nothing holding the front few inches to the hood, it tends to lift a little when highway driving, more so with a strong headwind.

I`ll be removing mine shortly to shave it and will see what can be done as far as keeping the scoop firmly positioned on the hood, perhaps with some 3M tape.

Other than that, I like the scoop, nicely styled and proportioned.
Hope this helps.
Old Aug 28, 2010 | 05:13 AM
  #8  
Apocalypse Pony's Avatar
Adminut
 
Joined: May 2009
Posts: 5,722
From: Maple Tree, Branch #2 above the rope swing
Originally Posted by James Hopes
Thanks for sharing the nice information. It will be very helpful for us.
Got something else that might be helpful for you-just a sec- I know it's here somewhere- oh yah, here we go - just for you -
Old Aug 28, 2010 | 02:04 PM
  #9  
mdurand's Avatar
CMOC Rookie
 
Joined: Jul 2006
Posts: 34
From: Windsor
I have the Roush scoop. My car has windviel blue Lemans stripes painted on by the dealer. The Roush matched perfectly. I painted a White stripe down the middle of the scoop to match the body. I think total I paid around $300. The dealer wanted $500 painted and installed. I'll tell you it was with much measuring and sweating that I drilled the first bolt hole in the hood. I just didn't trust the 3M by itself. I put the tape on too so its not going anywhere. Oh and the dealer could not get the Roush scoop so I picked one up at a Ford dealer in Detroit and paid the duty too. Huge box!!!
Old Aug 28, 2010 | 07:08 PM
  #10  
ChadStang's Avatar
Moderator
 
Joined: Aug 2005
Posts: 6,871
From: Slave Lake, AB
I've seen a few of the Roush scoops and they look and fit good.



All times are GMT -5. The time now is 03:13 AM.