Lowered Sn95 Thread
Hey guys,
Would appreciate it if you could post sum pics of Sn95s lowered, if possible details on how low you went??? Not sure how low to go??? Need help!!!!!!!! |
I dont have any pictures of mine, but I just lowered it about 1 1/2". I installed Steeda Sport springs that I bought from Pat @ Steeda.. Rides nice, I just replaced my struts with stock replacements (sensatracs). Rear needs to be a little stiffer though, am considering replacing them again with Illumina's.
My car doesnt rub .. I wouldnt go more than 1 inch more. It would definately rub then, It also depends on how low your exhaust hangs. Oh BTW on a drive up hoist without blocks of wood under the ramps my car is about 1mm away from riping off the front lip on the way down.. So if you lower any lower than what I have be prepared to have a hard time getting a alignment done without doing alot of preparing for your car to go up the ramps. |
I merged the thread here in the suspension category, I hope you don't mind.
Mine is lowered but I do not have any really good pictures to show, just this one :( https://www.cmoc.ca/photopost/data/5...s/DSC02870.JPG I put in Eibach Pro Kit, I think it lowers it around 1.5 inches |
No worries about the merge, sorry i submitted the same thread twice.
Car looks good by the way!!! |
3 Attachment(s)
Eibach Sportlines springs(2.0 in front,1.8 in rear,mine might've drop slightly more though..LOL),Maximum Motorsports Caster Camber plates,and spring iscolators,Energy Suspension rack and pinion off set bushings,and "FOX BODY" (due to the drop) Lakewood 90/10 struts up front,and stock shocks in the rear.
Attachment 23824 Attachment 23825 Attachment 23826 |
3 Attachment(s)
Here's my '98, had H&R supersport springs, rode great, looked great.
Attachment 23821 Attachment 23822 Attachment 23823 |
|
Originally Posted by Stang Illusions 5.0L
(Post 75360)
|
Originally Posted by tear u a new 1
(Post 75361)
are you goin with the flaming sexuall paint like that 1? stay with black , it makes you look less gay. lmao
LOL, No I was thinking hot pink like your pin stripe lol |
Originally Posted by 1LOW03GT
(Post 75341)
Eibach Sportlines springs(2.0 in front,1.8 in rear,mine might've drop slightly more though..LOL),Maximum Motorsports Caster Camber plates,and spring iscolators,Energy Suspension rack and pinion off set bushings,and "FOX BODY" (due to the drop) Lakewood 90/10 struts up front,and stock shocks in the rear.
http://i88.photobucket.com/albums/k1...lubpics038.jpg http://i88.photobucket.com/albums/k1...lubpics042.jpg http://i88.photobucket.com/albums/k1...t/IMG_6256.jpg I have a 94 GT with a 315/35zr17, will it rub??? |
Originally Posted by Ponyryd
(Post 75347)
Here's my '98, had H&R supersport springs, rode great, looked great.
http://i51.photobucket.com/albums/f3...1/4f20dff0.jpg http://i51.photobucket.com/albums/f3...1/3529c121.jpg http://i51.photobucket.com/albums/f3...Picture011.jpg |
Originally Posted by neo1977
(Post 75367)
How much drop is that?
|
3 Attachment(s)
Ford Racing "F" springs. +or- the isolators.
Attachment 23818 Attachment 23819 Attachment 23820 Wheel spacers and 275s on the back. Jon |
Originally Posted by neo1977
(Post 75365)
Wow that kooks great, what size tire are you running in the rear???
I have a 94 GT with a 315/35zr17, will it rub??? I am running 275 40 R 17's for both street tire,and drag radial,ad no rub.:cool: |
Originally Posted by 1LOW03GT
(Post 75341)
Eibach Sportlines springs(2.0 in front,1.8 in rear,mine might've drop slightly more though..LOL),Maximum Motorsports Caster Camber plates,and spring iscolators,Energy Suspension rack and pinion off set bushings,and "FOX BODY" (due to the drop) Lakewood 90/10 struts up front,and stock shocks in the rear.
http://i88.photobucket.com/albums/k1...lubpics038.jpg http://i88.photobucket.com/albums/k1...lubpics042.jpg http://i88.photobucket.com/albums/k1...t/IMG_6256.jpg |
1 Attachment(s)
Here is a few of mine
[IMG]http://i18.photobucket.com/albums/b101/poneypowered/001.jpg[/IMG http://i18.photobucket.com/albums/b1...owered/003.jpg Attachment 23455 |
Originally Posted by poneypowered
(Post 82431)
THATS A FUNNY LOOKIN sn95 !!stooges: :D
|
My '98 Cobra with FMS 'B' springs, mm cc/plates and Tokico Bullitt struts and shocks...it lowered the front 2" and I didn't measure the back before I started.smack:
http://www.mustangmods.com/ims/u/1235/1767/34364.jpg http://www.mustangmods.com/ims/u/1235/1767/15364.jpg |
Originally Posted by 1Nasty96
(Post 75373)
Ford Racing "F" springs. +or- the isolators.
http://i77.photobucket.com/albums/j5...stang05003.jpg http://i77.photobucket.com/albums/j5...stang05001.jpg http://i77.photobucket.com/albums/j5...stang05002.jpg Wheel spacers and 275s on the back. Jon |
All times are GMT -5. The time now is 01:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands