Johnnybee |
06-27-2018 10:57 AM |
That is going to be a problem for you as the part likely comes as an assembly. Is it possible to buy the entire line (and that is assuming you can get at the other end)? That may be the only option you have to maintain as original. Another option would be to cobble up something. I presume: (i) the line is for vapours only; and (ii) the white portion is plastic. You could cut the line short of the connector and trim the white plastic line (I presume it has a lip on the end) and connect them with a piece of fuel line, which will not suffer from the vapours. I have found Parts Source to be somewhat useful for buying plastic pieces to fit dissimilar sized lines together.
|