Slick
 

What is the largest slick you can run on a 91 NOTCH.. Deleted Quad shock.

Thanks

Branden

On my car I have had 28/11.5/15s to tall but they fit

with the right offset you can run 11.5x26x15

A 28x10.50 ET Drag on a 10" rim can fit. It's plenty of tire for most combos.

I agree for time, but unless your running a 4.10 gear or big HP, I would run a 26" tall slick or ET Street.

cheers :tup

I hoping for 450wrhp after a blower.. that should be enogh stick eh

You will want the 28" depends on your gear.

Having been there and done that I'd say stick with a better fitting 26x10 and gear it for that, it's a far easiler fit. 3.73's and that tire should go 124-125mph at under 6200rpm and if you plan on more drop down to a 3.55. A 28" slick is a huge tire to pull out of the hole and out of boost the small motors just don't pull that tire as well. Gearing will help but you have to watch trap rpms. If you do go with a 28" slick, get something narrow. I swapped to a set of 28x10.50's and my old blower combo sucked. Pooch out of the hole and lost a bunch of MPH up top. Back to the smaller 26x10's and all was well except the high traps rpms and limiter interference so in went the 3.55's with no real side effects but 30-400rpm less in the traps.

I don't think TC89LX has a clue of what he's talking about !! ;)

I caught him in action today ! :tup

http://img113.exs.cx/img113/5748/TMP18.jpg

LOL Rick!

700+ft/lbs sure helps haul a 28" slick out of the hole for sure!