Canadian Mustang Owners Club - Ford Mustang Forums

Canadian Mustang Owners Club - Ford Mustang Forums (https://www.cmoc.ca/)
-   Mustang Drag Racing & Road Racing (https://www.cmoc.ca/mustang-drag-racing-road-racing-27/)
-   -   Attn 4 Eyes (https://www.cmoc.ca/mustang-drag-racing-road-racing-27/attn-4-eyes-7458/)

bombdigitty 01-02-2007 04:09 PM

Attn 4 Eyes
 
Any idea what i can expect out of a mainly stock 86 GT T-roof?

0-60?

1/4 mile

1low03gt 01-02-2007 09:23 PM

A stock '86 GT will see a good 15.1 or so.A good driver might ge it into the 14's.With a few bolt ons like full exhaust,pullies,k&n,and the air silencer out,mid 14's to 14.3 ish.MY buddy had a '86 GT T roof,mint,mint,mint,then he sold it ,and replaced it with a Honda smack: .

bombdigitty 01-02-2007 11:29 PM

ok...thats sorta what i had in mind...thanks

Scones 01-03-2007 08:00 AM

I managed a best of 13.2@102 with the 300000km longblock, down to the untouched E6 heads. I had a home portmatched 87+ upper and TB, 3.73s, pullies, ported stock headers, stock 4 cat h-pipe run open, 9 year old ET streets, and a lot of gutting. It's not hard to get these cars into the 13s, hell I would have been in the 12s with a real slick or at a prepped track. If you're looking for bolt-ons I've got that portmatched upper and an 89 TB, some E7 heads, an electric fan, ported stock headers, and prolly a few other things to get you going....

bombdigitty 01-03-2007 01:49 PM

I already have all the parts i listed above. But the port matched intake and the electric fan sound interesting

Scones 01-03-2007 04:21 PM

sorry, i must be blind as i can't see any parts lol

PM if you would like that intake and fan, I have no use for them so they are only taking up space

bombdigitty 01-04-2007 09:11 AM

Oh right...lol..sorry that was another post, I got confused again...lol

So far the parts i'v collected are:

89 upper and lower
89 E7 heads
88 ECM
88 Throttle body
88 EGR spacer
BBK long tubes
Off road H pipe
Noisy timing gears

bombdigitty 01-04-2007 09:15 AM

So...if i use an electric fan, how do i loose the stock fan?

Do i still run a belt around it? Becasue all i would have on the cerpentine is the P/S and the Alt then...that might look kinda funny.

Scones 01-04-2007 11:15 AM

The stock clutch fan is held on by 4 bolts. Simply Take them off and the fan comes off of the pulley. Then put the bolts back in with washers on them (if you don't use washers the pulley will crack). After that you mount your electric fan to the radiator and wire it up with a toggle switch so you can control when it comes on.

bombdigitty 01-04-2007 11:37 AM

whats the advantage to controling when it comes on? also i might be the type to forget to turn it on...or offf


All times are GMT -5. The time now is 01:02 AM.


© 2024 MH Sub I, LLC dba Internet Brands