For more power..
Is there such a thing as a under drive pully kit or do you buy them individually ?
Are they hard to install for a complete nitwit ? thanks\ Grassy |
Fairly easy install, They sell them as a kit.
|
Best place to buy ?
Thanks Grassy |
Tough call, I know I went with STEEDA because i couldn't pass up the deal at the time. To be perfectly honest I don't know if I would do them again given the choice. On the 5.0L they made more of a difference in my opinion. When we installed them on my 2002 and on my friends 2006 GT we noticed no change. Others may have different opinions or input though.
|
Thanks. That was the next thing I was going to do..I heard 14 hp at the wheels. has anyone in this group done it to the 05-09 ? Was there a noticable ?
Thanks Grassy |
you can buy them at americanmuscle.com and steeda a better than the no name,you'll need a impact gun to remove them with puller.
|
Do stick with the Steeda pulleys,most pulleys by other companies are piggy back!You don't want them.:wink:
|
When I did mine back in the day, I bought a set of MAC under drive pulleys...
When I went to install them I had to machine 3/8 of an inch off the water pump pulley!!! That was not fun and I was not impressed! On a side note once it was installed, I did notice a HP change....there was greater HP's but not much, enough to notice...! But if I were you I would stay away from MAC unless you have access to a Lathe! If you do not have Under drives by now it will be the best 100 bucks you ever spent! |
OK, so here they are for 05 to 09 V8 and V6"
Steeda Underdrive Pulley System - 05-09 Ford Mustang Steeda Underdrive Pulley - 4.0L V6 - '05-'09 Ford Mustang This is a 2010 improvement for me. If I could figure out how I can change it, I would change the wordage below with an updated list. Grassy |
What do you mean your signature?
if so... Click on User Control pannel, then edit signature! |
All times are GMT -5. The time now is 04:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands