what tools do i need to pull a tranny on 1999 v6 mustng v6
 

what tools will I need to pull a tranny on a 1999v6 mustang standard I just want o make sure I bring all the right tools

Ok lets see.

1) 8mm,10mm,13mm,15mm wrench
2) 8mm,10mm,13mm,15mm,18mm,21mm and a 1" deep and shallow 3/8" sockets and ratchet
3) small flat head and a large flat head screw driver
4) small phillips head screw driver
5) a long 3/8" or 1/2"-3/8" extension to get the top of the trans bolts to engine
6)12 point 12mm wrench and hammer for drive shaft bolts on diff
7) side cutters
8) hack saw. You just never know.

thanks for the time to type that out and the help.... and side cuters I get everything else but those? what would I use those on

Sometime there are zip ties that hold harness together you need to undo