Plugs for Nitrous
I am sure I saw this here, but can't find it now.
SO who has the correct plug numbers for going a couple steps cooler when running N2O? Autolight, NGK, champion. Also is it .35 gap you set it to? Thanks. |
it depends on the size of the shot, if it's only a little 75 shot a stock plug and gap would be fine....
|
Heat ranges:
http://www.accufabracing.com/denso_2.htm |
Well while I will start w/ low HP, eventually it will be to the 150 shot. So I am guessing 2-3 ranges colder?
|
That page is about right on for every 50hp in boost or spray drop one range down. I have been running HGK in my motor when spraying. Also use the ford motorsports plugs as well. I havent had any probs with them as daily plug to spray now and then.
|
I Like the NGK Irridium plugs for spray and boost.
|
I am a motocraft copper guy :-)
Use whatever your tuner suggests if you can't make up your mind...I am sure you will be happy with the final decision |
Originally Posted by meister@steeda.ca
I am a motocraft copper guy :-)
Use whatever your tuner suggests if you can't make up your mind...I am sure you will be happy with the final decision |
Im using NGK UR55 gapped at .032. For a 125 shot.
|
Get Autolite 23's, NAPA can get them next day.... They're perfect, 2 heat ranges colder AND pregapped for .035
I use them religiously for my NX 150 shot, best plugs you can get for a 5.0 on spray. |
All times are GMT -5. The time now is 08:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands