---

turbo 1.15 ex a/r 1.10 int a/r

---

---

My brother went to the dyno today with his 95 mustang. It has a stock bottom engine with tfs heads, stage1 cam 42lb injectors, and a powerstroke turbo. His junky c&l maf meter was maxing out, so they couldnt run it to redline.

At 8lbs boost he was getting 420hp and 480fp torque.
They wouldnt go to 6000 rpm because the a/f was getting lean.
His maf was maxxing out by 4600rpm and would start leaning out.
He is using a tweecer to datalog.
He wanted to see what more boost would do so he turned it up to 11.
At 11lbs boost the dyno showed 460hp and 511fp torque.
They let off at 4500 rpm because of leaning.

With a good maf and 11lbs, I think it will hit 500hp by 6000 rpm

The guy running whe dyno was impressed with how the torque jumped up and stayed linear all the way up the rpms.

I will try to post the graphs when he gets them emailed to me.

Pics of his setup are on my web page, courtesy of XXXX.

---

---

---

---

---