1995 Mustang Gt for parts
 

1995 Ford Mustang GT for parts

Vehicle is black with tan leather interior. 5 spd, 155000 kms on motor and tranny, 17" tri spoke mustang wheels with good rubber (245/45HR17),

Note: involved in front end collision damaging rf corner. Radiator, rad support, both front fenders, air pump, abs unit in rf corner, rad fan, coolant bottle, windshield ..........NOT SALVAGEBLE.

Could it be repaired ?? (not likely.............. but never say never). Has not been branded by insurance :deal: . Previous owner had liability only so insurance wasn't going to help. (Left turn = his fault) :cry2:

Vehicle is in Ajax in my brothers house. I will assist in any removals which are reasonable. If I have to pull it and break a sweat, someone's gotta pay :biggrin:

I'll be taking pictures of it from all angles on Monday Sept 5, 2005. Once that is done I can e-mail pictures.

If you are in the Ajax (Durham) area on Monday September 5,2005 between 12:00pm and 5:00pm page me at 416-374-5147, (leave a message) and you can come see it if you wish.

1995 mustang
 

How much for the whole car the way it sits?

I need some tires.................what kind and how much? How much tread is left also?

To: 88 Trunk
 

$2900.00 as it sits.
Nothing has been removed yet. I have pulled away some of the parts up front ( in the crumpled area )


The only parts I plan to remove is the 12 pack cd changer and dvd system. I will leave the factory deck in it.

If you're interested you can page me and come see it. I can't guarantee that some parts won't be sold by 5 pm today. If no one steps up, by all means you can make me an offer.

Les

To: Foxy85GT
 

245/45 HR 17

Kuhmo ECSTA 711

Go to www.tirerack.com

Select tire size.......
Select Kuhmo.........
Select HR ...speed rating

Are you interested in tires only ??? I'd prefer to sell the rims with them if possible.

fronts have about 35 % left
rears have about 50% left
rims have some dings. no major damage. Overall good condition

Pm Sent !!!!!

How much for the front rotors, calipers, spindles, hubs? Thats if the rotors are is good shape.

How much for the whole thing then with the wheels? I have a 1992 Nissan Maxima that would look nice with 17" wheels...........

Curious about the salvagable engine parts. Or the upper intake, harnesses, fuel rails, injectors, MAF, intake tube and computer. I wouldn't mind doing a 5.0 swap, I already have a 5.0 from a Lincoln Mark VII but I'll probably need the upper and electronics from a 94/95.

Rearend
 

What do you want for the rearend?