Canadian Mustang Owners Club - Ford Mustang Forums

Canadian Mustang Owners Club - Ford Mustang Forums (https://www.cmoc.ca/)
-   Mustangs for sale (https://www.cmoc.ca/mustangs-sale-18/)
-   -   Interested for a aluminum drive shaft ??? (https://www.cmoc.ca/mustangs-sale-18/interested-aluminum-drive-shaft-995/)

LeKiD 02-22-2005 02:29 PM

Interested for a aluminum drive shaft ???
 
I am at present under development to become distributor of aluminum drive shaft to fit on mustang thru 95 , I aim at speed shop of Quebec ,Ontario and estern of canada , i have already an idea of the prices, i would like to know which would be approximately your volume of purchase, I could based my price according to the request, more i have offers less expensive they will be , for the moment I start has to sell the aluminum drive shaft for the model 78-95 man or automatic which one a ds of 45.5inch , they are made by a profesional drive shaft builder

thanks

Alexandre

alexandre.daneau@dr.cgocable.ca

Dech #009 02-22-2005 03:03 PM

You have a price in mind per driveshaft? Are these going to be balanced with the proper yokes? I'd be interested if the price is right.

1BADRIDE 02-22-2005 03:20 PM

Depending on what my donor 5.0 has on it, I might be interested in this too. Maybe a group purchase can be organized to fulfill the qty requirement?

LeKiD 02-22-2005 04:19 PM

they will be balanced to zero , whit 1330 serie U-joint , it will fit to T-5 and AOD tranny and 8.8 rear-end ,.114 in. wall thickness, 6061-RT62 aluminum seamless tube , same as FMS-M4602G

Scones 02-23-2005 12:36 AM

i've been looking for one for a long time, as long as the price is right....

Stang Seller 02-23-2005 12:58 PM

Then lets set up a group purchase, I'm sure I can move quite a few of these. LeKid, PM me with prices based on volume and maybe we can do business.
SS

LeKiD 02-23-2005 01:28 PM

im waiting my new price list , as fast as i know i pm everybody who can be interesed

but i can supply any store who is interess to do business whit me , from that price can be better

i called Ford SVT at Granby today and it retail 370$ +tx

Iceman_19 02-23-2005 05:16 PM

they are around 189 usd new i believe, maybe a bit more, depending where you go.

LeKiD 02-23-2005 05:36 PM


Originally Posted by Iceman_19
they are around 189 usd new i believe, maybe a bit more, depending where you go.

i call for price at FORD .. i know aftermarket are less , but calculate shipping and custom ...

summit sold his oem ford alu DS at 250 $

i try to have a good CDN price .. if you look for usd .. go ahead

my goal is encourage canadian builder and store .

03GreyMach1 02-23-2005 06:44 PM


Originally Posted by LeKiD
I am at present under development to become distributor of aluminum drive shaft to fit on mustang thru 95 , I aim at speed shop of Quebec ,Ontario and estern of canada , i have already an idea of the prices, i would like to know which would be approximately your volume of purchase, I could based my price according to the request, more i have offers less expensive they will be , for the moment I start has to sell the aluminum drive shaft for the model 78-95 man or automatic which one a ds of 45.5inch , they are made by a profesional drive shaft builder

thanks

Alexandre

alexandre.daneau@dr.cgocable.ca

What is the advantage of one of these?

Iceman_19 02-23-2005 11:34 PM


Originally Posted by LeKiD
i call for price at FORD .. i know aftermarket are less , but calculate shipping and custom ...

summit sold his oem ford alu DS at 250 $

i try to have a good CDN price .. if you look for usd .. go ahead

my goal is encourage canadian builder and store .

well, if i can get the same part cheaper, i dont care who sells it.

XLR8 02-24-2005 11:25 AM

I'd be interested in one also if the price is right.

Dech #009 02-24-2005 11:27 AM


Originally Posted by Iceman_19
well, if i can get the same part cheaper, i dont care who sells it.

exactly...

02blkvert 03-02-2005 08:20 PM

I am certainly interested.....let me know price and lets try to group this together

Scones 03-03-2005 07:50 AM


Originally Posted by 03GreyMach1
What is the advantage of one of these?

Well for one, they are a lot stronger than the factory ds, but more importantly they are also a lot lighter. The weight is also rotational weight so you are getting a double bonus, removing weight and freeing up horsepower by not having to turn so much weight. Hope that helps...

Scotts88 03-03-2005 08:04 AM

i might add they smooth the drivetrain out quite a bit! less vibrations. its really noticeable.

bp82gt 03-03-2005 04:24 PM

driveshaft
 
im also looking for one. i have a 4 spd SROD though. as long as it would fit.......im interested. let me know.

LeKiD 03-03-2005 07:56 PM

i m waiting one more welding material supplier , i estimate production come in april .


Originally Posted by bp82gt
im also looking for one. i have a 4 spd SROD though. as long as it would fit.......im interested. let me know.


Driveshaft will fit 1979-95 Mustang/Capri 5.0L vehicles with T-5/SROD/C-4/AOD , i will use 1330 U- Joint if you have to change the slip yoke

i hope to have good news fast !!!

83Rag 07-02-2006 07:28 AM

Driveshaft update..??
 
What's the latest on these?? Price?
Thanks

Scones 07-02-2006 09:13 AM

good question

fordrage460 07-02-2006 10:25 AM

I'd be interested if the price is right.

Darkhorse 07-02-2006 10:32 AM

I would be interested if the price is right too.

02blkvert 07-02-2006 10:43 AM

I have a 2002 Gt would you be building ds for these years also? I have been looking at prices in the States......best I could find was about #210.00 usd.

LeKiD 07-02-2006 02:30 PM

i ve search many many shop who can built a lot of 10-12 driveshaft but in canada it s impossible to enter the market at these price .

The price i ve got is 400$ whitout slip yoke and flange or 550 whit slip yoke and flange . it s overpriced . FMS is less than these price .

i m waiting respond from a guys in USA if he can build driveshaft for me at better price .

Sorry for delay . I continue to seek somebody who could manufacture them to me at better price.

Alex

gfong 07-02-2006 04:27 PM


Originally Posted by LeKiD
i ve search many many shop who can built a lot of 10-12 driveshaft but in canada it s impossible to enter the market at these price .

The price i ve got is 400$ whitout slip yoke and flange or 550 whit slip yoke and flange . it s overpriced . FMS is less than these price .

i m waiting respond from a guys in USA if he can build driveshaft for me at better price .

Sorry for delay . I continue to seek somebody who could manufacture them to me at better price.

Alex

You should try and seek out a Cdn retailer that can get a group buy going and than reduce the price! Get 10 people or so and they should lower the price and maybe shipping.

Try Steeda.ca (Pat) in Milton or Performance Umlimited (Barrry) in London Ontario for the Driveshafts.
I just purchased one for 299.00 Cdn plus tax from Barry at Performance Unlimited.
If I would have waited until today I could have saved 1 % gst. j/k :)


All times are GMT -5. The time now is 06:58 PM.


© 2024 MH Sub I, LLC dba Internet Brands