Adding a sub to Shaker 500
 

I recently added a sub and amp to my shaker 500 stereo. I wanted on oem look, so wanted to keep the stock headunit and keep most of the trunk space. I did some research and attempted my own budget install, and spent less than $800.

I found valuable info here: 2012 Mustang Shaker 500 Add A Sub Install - www.Evilcartman.com
Although I tapped into the rear 6x9s for a signal which was much easier.

Equipment I used:

Audiocontrol LC2i
JL Audio 12w3v2
JL Audio JX250/1
Stinger 4 gauge wiring kit (30amp fuse)
Cheap Mustang Ebay Speaker box - http://www.ebay.ca/itm/2005-2014-For...5U8BpG&vxp=mtr
Cheap Ebay Grill - NEW GS Audio BG 12 Universal 12" Subwoofer SUB Woofer Grille BG12 Grill | eBay

End result:

https://www.cmoc.ca/attachment.php?a...ine=1454772203

https://www.cmoc.ca/attachment.php?a...ine=1454772203

Not bad, how does it sound? Trunk lid and rear window shaking?

It sounds really good. Can really dial it in on both amp and lc2i. The amp is only 250wx1 @ 2 ohm, which is what I am running the sub at. Not earth shattering loud, but still big improvment. Mirrors shake and whatnot, but not driving down the road with a rattling trunk. I have built several car stereos over the years, and this is one of the more simple setups. Just enough to add a bit of bass, more sound quality than spl.

Great Job!

thanks!

JL was always my favorite. I haven't built a stereo system in years, the factory stuff is usually ok for me. The Shaker 500 is pretty weak in the Bass Dept, but I'm more than happy with the output of the Shaker Pro in my car.

JL has one of my favorites too, although have only used their equipment once before. Other builds I have done, I have used Kicker subs, Rockford subs, even a Kenwood sub. All though I have noticed over the years quality of those products now a days isnt what it used to be. JL has stay the same from what I've been told.

Ya the shaker pro or 1000 is what inspired me for the corner box in the same location. I looked into just adding the oem equipment, but would have costed a lot more.

Small update. I downloaded some songs with solid bass, and notice the top of the trunk was rattling a little bit. Visions had Dynamat on sale, so I got a xtreme custom kit for $35. Even ended up with a little left over.

https://www.cmoc.ca/attachment.php?a...ine=1456935246

Trunk cover back on.

https://www.cmoc.ca/attachment.php?a...ine=1456935246

I've always wanted to try that stuff but never have. Is it fairly easy to work with? Make much of a difference?

Yes it is very easy to work with. I did 150 sq feet on an old car. I used a brand called brown bread. It is easy to lay, and I have a small roller that came in that kit to ensure it is sticking to everything. Issue I had with brown bread was the actual cutting of the pieces. Gummed up my cutters pretty bad.

I found the dynamat easier to cut for sure. And just as easy to lay. I still had my old roller from the first time, so used that to roll everything on as good as possible. Then I just used a screw driver to poke holes where all the clips go to hold the trunk lid cover on. Had it done within an hour. I did cut my fingers a couple times using a razor blade, but thats because I was rushing as day light was coming to an end. :LOL:

It definately makes a difference. Makes the car sound more solid, hear less road noise, etc.

Good to know. What do you cut it with, tin snips?

Ya thats what I used, worked well.

Got my Lloyds GT trunk mat in today. Fits really nice. Just need to put the sub/box back in. Pic shows how I bolted the box in. I replaced a plastic snap, with a long ass bolt. Then tighten inside the sub box with nut and washer. (sub has to be removed to take box out).

https://www.cmoc.ca/attachment.php?a...ine=1457037062

https://www.cmoc.ca/attachment.php?a...ine=1457037062

Looks good :tup Great idea on the long bolt, nothing worse than stuff sliding around during "spirited" driving.

Thanks man. Ya definately wouldnt want anything sliding around. :)

It was nice bolting to that location as well, as I didnt have to cut the trunk liner, but just remove the plastic push pin. Behind the carpet the bolt is also tightened down with another nut for it to stay tight in place. Little tricky to get the sub box to slide onto the bolt, but with some patience it can happen. Just didnt have time at lunch to get the box in place. Maybe tonight after work. :D

Got it done. Glad the trunk mat and box match in colour fairly well.

https://www.cmoc.ca/attachment.php?a...ine=1457053039

https://www.cmoc.ca/attachment.php?a...ine=1457053039

Clean installation, looks great, trunk mat was a nice addition.

Thanks man, thats always been the goal with my stang. Nice and clean... almost a "what ford should have done". :)

Got my matching Lloyds GT floor mats today. Fit nice, sorry for the grainy pics.

https://www.cmoc.ca/attachment.php?a...ine=1457488783

https://www.cmoc.ca/attachment.php?a...ine=1457488783

Those look good, it'll be a shame to step on them

Lol, still plan to use the oem ones for road trips if necessary. But the old lady said the same thing. :lol