Oil Catch Cans
#12
Where are you guys getting the JLT catch can? Hopefully a Canadian suppplier. I want to put one on mine too. I put a CC on my 09 Envoy but used an air filter with some of that copper pot scrubber inside. Works great but I want a better looking one for the 'stang.
#13
905-837-7700
960 Brock Road, Pickering, Ontario L1W 2A1
DaSilva Racing
#15
#18
I just cut the quick connect from the Roush PVC hose ends. I believe the stock quick connectors fit the -AN 10 hose The barbed connector ends slide right on with a bit of elbow grease and a touch of oil.I'm sure ford would have those barbed quick connect hose ends. I then taped the end of the hose after trimming and used a very small hose clamp. One is under the intake tube and one is at the back by the firewall.Very hard to see. Try for some pics tomorrow.
#19
I just cut the quick connect from the Roush PVC hose ends. I believe the stock quick connectors fit the -AN 10 hose The barbed connector ends slide right on with a bit of elbow grease and a touch of oil.I'm sure ford would have those barbed quick connect hose ends. I then taped the end of the hose after trimming and used a very small hose clamp. One is under the intake tube and one is at the back by the firewall.Very hard to see. Try for some pics tomorrow.