Canadian Mustang Owners Club - Ford Mustang Forums

Canadian Mustang Owners Club - Ford Mustang Forums (https://www.cmoc.ca/)
-   5.0L (https://www.cmoc.ca/5-0l-36/)
-   -   Anyone do a rear disk conversion? (https://www.cmoc.ca/5-0l-36/anyone-do-rear-disk-conversion-3461/)

fast Ed 11-06-2005 03:02 PM

What about using the SN95 Cobra 11.65" brakes? Could be put together for less money, and you don't have to worry about getting a replacement rotor drilled for the 5 on 4.5" pattern (if you were to trash the Baer rotor, which is a 12" Corvette piece drilled for 4.5" circle). I doubt that there would be much, if any, difference in braking capacity. The only real advantage I can think of would be the lighter weight of the aluminium caliper with the Baer system.


cheers
Ed N.

AllActionDan 11-06-2005 04:43 PM


Originally Posted by G-ForceJunkie
so just lapping days eh? that's ok too! :tup


ill most likely get in to some sort of racing league, but for now im going to start there...are you in a class or group? if so were can i get some info on getting involved? thanks

AllActionDan 11-06-2005 04:47 PM


Originally Posted by fast Ed
What about using the SN95 Cobra 11.65" brakes? Could be put together for less money, and you don't have to worry about getting a replacement rotor drilled for the 5 on 4.5" pattern (if you were to trash the Baer rotor, which is a 12" Corvette piece drilled for 4.5" circle). I doubt that there would be much, if any, difference in braking capacity. The only real advantage I can think of would be the lighter weight of the aluminium caliper with the Baer system.


cheers
Ed N.


im thinking of doing that because i went to performance improvments to day and they want $1150 plus tax for the 12" rear brake kit...seems like a lot. im going see what it will cost me if i get it from ford part by part...for anyone that is intrested in better brakes check out this site http://www.sn95brakes.com/

G-ForceJunkie 11-06-2005 05:21 PM


Originally Posted by AllActionDan
ill most likely get in to some sort of racing league, but for now im going to start there...are you in a class or group? if so were can i get some info on getting involved? thanks

I'm in GT3 in Solo 1, check out www.soloontario.com and click Solo 1 :)

AllActionDan 11-06-2005 07:44 PM


Originally Posted by G-ForceJunkie
I'm in GT3 in Solo 1, check out www.soloontario.com and click Solo 1 :)

cool, thanks. im going to look into this.. :)

LongHood_ShortDeck 11-07-2005 12:43 PM

Solo1 is as economical as real racing can get. (Next to your FREE lapping days)

They charge only $110 for a 1 day event and offer a racing driving school every spring that includes two days of schooling + 1 free event day for only $395. (last years price)

Stang Seller 11-18-2005 09:52 PM


Originally Posted by AllActionDan
i got brembo 4 pistons with 13" rotors on the front with sn95 spindles, and 17x9 cobra r rims, thats why i need 5 lug for the rear. The 12" baer rear system seems to be a nice set...from what i have read.... the installation doesn't matter to me, im going to install them my self (im a licenced tech at a VW dealership). do you know if the 5 lug kits come with new axels and do you know if the rear pads and rotors are also from a 'vett? thanks,
dan

If you're going to do the rear disc setup, go with the SN95 Cobra rear setup and spend the money you're saving on a set of 31 spline axles and carrier. You will most likely have to roll the lip on the rear quarter panels thanks to the SN95 rear axle width combined with the 17x9 wheel. Get your hands on an appropriate master cylinder and booster, Fast Ed should be able to point you in the right direction as he's the Ford Parts Guru.
SS

AllActionDan 11-19-2005 05:36 PM


Originally Posted by Stang Seller
If you're going to do the rear disc setup, go with the SN95 Cobra rear setup and spend the money you're saving on a set of 31 spline axles and carrier. You will most likely have to roll the lip on the rear quarter panels thanks to the SN95 rear axle width combined with the 17x9 wheel. Get your hands on an appropriate master cylinder and booster, Fast Ed should be able to point you in the right direction as he's the Ford Parts Guru.
SS


I dont want the sn95 axels, they are too long for the 9 inch wide wheels. i got aerostar axles from a junkyard ....they are the same size as the fox axles, but in 5 bolt. i dont drag race, so i dont need the 31 splines. im going to get a 1 1/8" master. im going to leave the fox booster for now, but if i dont like the feel, im going to get a sn95 V6 booster. ford racing sells a cobra rear caliper set. i found brakets that will let me run fox axels with sn95 cobra calipers. if anyone is intrested in swaping to rear disks, check out sn95brakes.com it will answer all your questions.
thanks for the help everyone that replied.

Kman 11-19-2005 09:25 PM


Originally Posted by AllActionDan
Anyone do a rear disk conversion on there car? im thinking of the baer 12" 5-lug system. suggestions or comments?

I'm just using the 95 rear brakes on my 89 drag car only.
Using brackets from http://www.northcobras.com/index.html They only space the wheels out 1/4 inch more each side.
These brackets will also work with C-clip eliminators.


All times are GMT -5. The time now is 02:36 AM.


© 2024 MH Sub I, LLC dba Internet Brands