HELP! need some guidence
02-20-2009, 05:15 PM
#1
CMOC Newbie
Thread Starter
Join Date: Jan 2009
Location: montreal
Posts: 14
HELP! need some guidence
hey everyone, I need some help this is my first build and I need to know if 2.02 are to big for a stock 93 bottom end.
my set up is this stock bottom end with patriot performance 2.02 intake and 1.60 exhaust a b303 cam its got a .480 lift and an edlebrock intake and i got a 9 psi supercharger. so i need to know if the 2.02 intake will have enough clearance to the piston and the cylinder walls. some many people have told me yes and no so can anyone clear the air on this one thanks a million
my set up is this stock bottom end with patriot performance 2.02 intake and 1.60 exhaust a b303 cam its got a .480 lift and an edlebrock intake and i got a 9 psi supercharger. so i need to know if the 2.02 intake will have enough clearance to the piston and the cylinder walls. some many people have told me yes and no so can anyone clear the air on this one thanks a million
03-02-2009, 02:02 AM
#2
CMOC Rookie
Join Date: Feb 2009
Location: sarnia
Posts: 47
You should change to dished pistons or you will be poping head gaskets like mad.To much compresion not even o-ring will handle 9psi on stock piston let alone the piston itself will melt causing more trouble than doing it right.You will wreck your heads.As for 2.02 dosen`t matter if you run supercharger then eh.Change pistons is what you need to do.$500 vs $3000 doing it all agian.
Thread
Thread Starter
Forum
Replies
Last Post
Foxy85GT
5.0L
9
04-23-2005 06:24 PM
