junk
#11
Originally Posted by LX351
What Overkill said. It also wouldn't hurt to clean the throttle body and check the TPS voltage should be close to .999 with throttle closed. Also hopefully nobody has been messing with the throttle plate adjusting screw.
There is good Mustang shops in your area you just have to go to the right one!
There is good Mustang shops in your area you just have to go to the right one!
https://www.cmoc.ca/forums/showthread.php?t=4493
#12
I belive that stang's car is a 94 or 95 and the throtle body should have a sticker on it stating not to clean it. There is a coating on the aluminum that the carb cleaner will remove causing it to gum up even quiker
#14
Originally Posted by OVERKILL
I read the thread and agree with meister@steeda.ca. I have worked on over a 100 mustangs over the years and this definitely helps with idling problems. If you choose not to check it and set it that is up to you but for the 5 mins. it takes I will check and set all mine.
Captin Spalding you are right about the sticker.
The coating doesn't seem to help with the build up issue on the throttle body's so I would still clean it. As LX-Markham said The throttle body cleaner shouldn't hurt the coating anyway.
I am just posting what works for me everybody has there own opinion on what works.
#15
Originally Posted by LX351
I read the thread and agree with meister@steeda.ca. I have worked on over a 100 mustangs over the years and this definitely helps with idling problems. If you choose not to check it and set it that is up to you but for the 5 mins. it takes I will check and set all mine.
Captin Spalding you are right about the sticker.
The coating doesn't seem to help with the build up issue on the throttle body's so I would still clean it. As LX-Markham said The throttle body cleaner shouldn't hurt the coating anyway.
I am just posting what works for me everybody has there own opinion on what works.
Captin Spalding you are right about the sticker.
The coating doesn't seem to help with the build up issue on the throttle body's so I would still clean it. As LX-Markham said The throttle body cleaner shouldn't hurt the coating anyway.
I am just posting what works for me everybody has there own opinion on what works.
, my Town Car's TPS voltage was like .82 or something when I got the car, but it ran fine for 18 friggin' years that way!
Last edited by OVERKILL; 12-06-2006 at 05:12 PM.
#16
Originally Posted by OVERKILL
Its not an opinion when guys that helped design the bloody thing state that there is a given "range" for it to be within in order to be viewed as the ECM as valid and whatever that base value is, is used as the "ZERO" reference point. Hell, you can even change that range with a PMS or TWEECER if you choose!
, my Town Car's TPS voltage was like .82 or something when I got the car, but it ran fine for 18 friggin' years that way!
, my Town Car's TPS voltage was like .82 or something when I got the car, but it ran fine for 18 friggin' years that way!
I think we are getting away from what we were trying to do here and that is help someone with an idling issue. I know you like to argue so you win. I will still set my TPS the way I always have. I have better things to do than argue over something like this.
#18
may have to look into this myself...just for routine matinece sake, but if its low idle your haveing trouble with it might be the same problem i have right now where the outer shell of the gas line cracked and the thin flexable inner line twisted...lol
#20
HELP SUPPORT CMOC. DONATE!
Thread Starter
iTrader: (10)
Join Date: Jul 2006
Location: Trenton
Posts: 4,271
Hahaha, I dont remember if the problem still presists or not LOL, I never did get to check the TPS voltage, if I remember correctly I think it was my brand new gay cap and rotor, because I didnt replace it with a motocraft OEM.