5.0L Ford Mustang 5.0L discussion area for heads, rebuilding, tuning, idle issues and all other modifications and performance parts.

Temp Gauge No Workie

Thread Tools
 
Old May 19, 2006 | 08:30 AM
  #1  
Badass_Forever's Avatar
Thread Starter
CMOC Veteran
iTrader: (1)
 
Joined: Apr 2006
Posts: 481
From: WIndsor
Temp Gauge No Workie

Guys, my 88 gt temp gauge is not workin, any ideas? im gonna go after market, but just not right now.. also, my turning singles are really so and messed up, sometimes they blink and then pause and stay on and then start blinkin normal, then stop? any ideas?
Old May 19, 2006 | 10:47 AM
  #2  
89notchback's Avatar
CMOC Addict
iTrader: (2)
 
Joined: Mar 2006
Posts: 605
From: Chatham, Ontario
I would start by checking the coolant temp sensor. If thats ok the pull the cluster out and check the back for burns, that will indicate the guage is toast.

As for the turn signals, start by checking all the bulbs and if they are good then change the signal switch. I have a extra one if you want it, try it and if fixes the problem then keep it.

Good luck.
Old May 19, 2006 | 05:53 PM
  #3  
Badass_Forever's Avatar
Thread Starter
CMOC Veteran
iTrader: (1)
 
Joined: Apr 2006
Posts: 481
From: WIndsor
Originally Posted by 89notchback
I would start by checking the coolant temp sensor. If thats ok the pull the cluster out and check the back for burns, that will indicate the guage is toast.

As for the turn signals, start by checking all the bulbs and if they are good then change the signal switch. I have a extra one if you want it, try it and if fixes the problem then keep it.

Good luck.
eh, if the signal switch is that round one, nither of my cars have it!
Old May 19, 2006 | 05:58 PM
  #4  
Ponyryd's Avatar
CMOC Elite
iTrader: (5)
 
Joined: Mar 2006
Posts: 1,531
From: Windsor
The coolant sensor for the dash is a 1 wire sensor, mounted on the intake, driver's side, just behind the a/c compressor (if equipped), unplug the connecter and ground it, the guage should peg, if it does, replace the sensor. As for the turn signals, it could be the switch but did you check the flasher? A new flasher is like 4 bucks, worth a shot.
Old May 19, 2006 | 08:04 PM
  #5  
89notchback's Avatar
CMOC Addict
iTrader: (2)
 
Joined: Mar 2006
Posts: 605
From: Chatham, Ontario
Originally Posted by Badass_Forever
eh, if the signal switch is that round one, nither of my cars have it!
Well if your car is a '88 then my '89 will work for you.
Old May 19, 2006 | 08:23 PM
  #6  
Badass_Forever's Avatar
Thread Starter
CMOC Veteran
iTrader: (1)
 
Joined: Apr 2006
Posts: 481
From: WIndsor
well how would you like to go about this
Old May 19, 2006 | 09:10 PM
  #7  
89notchback's Avatar
CMOC Addict
iTrader: (2)
 
Joined: Mar 2006
Posts: 605
From: Chatham, Ontario
Originally Posted by Badass_Forever
well how would you like to go about this
Well how about you and I get together and we solve the problem. You have the car and I have the parts and the knowledge to make it work out. What do you think?
Old May 19, 2006 | 09:23 PM
  #8  
White_Snake's Avatar
CMOC Newbie
iTrader: (7)
 
Joined: May 2005
Posts: 103
From: Trenton, Ontario
and you live in the same city....should be a no brainer
Old May 20, 2006 | 01:02 PM
  #9  
Badass_Forever's Avatar
Thread Starter
CMOC Veteran
iTrader: (1)
 
Joined: Apr 2006
Posts: 481
From: WIndsor
Originally Posted by 89notchback
Well how about you and I get together and we solve the problem. You have the car and I have the parts and the knowledge to make it work out. What do you think?
i know this, its 2 pm and im gonna go start workin on my car, i live near walker and tec, so if your around, stop buy. 818-7169, o ya, my names ryan!
Old May 20, 2006 | 10:36 PM
  #10  
89notchback's Avatar
CMOC Addict
iTrader: (2)
 
Joined: Mar 2006
Posts: 605
From: Chatham, Ontario
Originally Posted by Badass_Forever
i know this, its 2 pm and im gonna go start workin on my car, i live near walker and tec, so if your around, stop buy. 818-7169, o ya, my names ryan!
Sorry man I been at work all day and I didn't catch the post. If you still need help let me know and I will hook up with you and get the problem figured out.



All times are GMT -5. The time now is 03:07 AM.