What heads were they running on the 94/95 GTs??
Hi All,
Well one of my heads on my 85 GT is the victim of someone putting in a spark plug wrong so it will be time to change them soon(even after a helicoil it is starting to come loose. I already know where I can get a set of ported E7 heads. Lastnight I was talking to some guy that has low mileage heads from a stock 95 Mustang GT. He said he may let them go for cheap(he started at $500 but I won't pay that). So any help or info would be great! |
Originally Posted by Foxy85GT
Hi All,
Well one of my heads on my 85 GT is the victim of someone putting in a spark plug wrong so it will be time to change them soon(even after a helicoil it is starting to come loose. I already know where I can get a set of ported E7 heads. Lastnight I was talking to some guy that has low mileage heads from a stock 95 Mustang GT. He said he may let them go for cheap(he started at $500 but I won't pay that). So any help or info would be great! |
Thanks for the quick reply bud. Were E7s still being used on the 94/95??? I guess once you get those E7s........you can get em machined for more flow........... :)
The guy I am supposed to go see also has a set of 3 underdrive pullies that he wants to sell for $120. Good deal? |
Yes the 94-95 use the E7TE-6049-AB head that has been used since 87
Garett |
try and look for a set of gt40 irons and slap em on you will make decent power with them
Originally Posted by Foxy85GT
Hi All,
Well one of my heads on my 85 GT is the victim of someone putting in a spark plug wrong so it will be time to change them soon(even after a helicoil it is starting to come loose. I already know where I can get a set of ported E7 heads. Lastnight I was talking to some guy that has low mileage heads from a stock 95 Mustang GT. He said he may let them go for cheap(he started at $500 but I won't pay that). So any help or info would be great! |
I wouldn't pay more than $100 for those heads, and $75 for the pullies.
|
heads ...remember to use your own head.
which ever head you choose, have them checked by a
good machine shop. check for : cracks warpage of deck valve job sealing valve guides add new seals and check all spring pressures too a little checking now may save alot of headaches later. goodluck. :tup |
All times are GMT -5. The time now is 05:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands