Canadian Mustang Owners Club - Ford Mustang Forums
1988 Ford Mustang LX 5.0 /09
1988 Ford Mustang LX 5.0 /09
0 2010/01/24 19:02:26
1988 Ford Mustang LX 5.0 HO /09
1988 Ford Mustang LX 5.0 HO /09
0 2010/01/24 19:02:26
1988 Ford Mustang LX 5.0 HO /09
1988 Ford Mustang LX 5.0 HO /09
0 2010/01/24 19:29:11
1988 Ford Mustang LX 5.0 HO head gasket repair June/10
1988 Ford Mustang LX 5.0 HO head gasket repair June/10
0 2010/07/01 21:36:30
1988 Ford Mustang LX 5.0 HO head gasket repair after cleaning upper cylinders lubricated with Lucas upper cylinder lubricant before sealing the engine
1988 Ford Mustang LX 5.0 HO head gasket repair after cleaning upper cylinders lubricated with Lucas upper cylinder lubricant before sealing the engine
0 2010/07/01 21:36:30
Mustang head gasket repair completed, Installed all new Ford racing gasket set w/graphite head gaskets for high performance applications, motor is currently a stock 1988 5.0 HO, Polished intake completed in 22 hrs June/10
Mustang head gasket repair completed, Installed all new Ford racing gasket set w/graphite head gaskets for high performance applications, motor is currently a stock 1988 5.0 HO, Polished intake completed in 22 hrs June/10
0 2010/07/01 21:36:30
1988 Ford Mustang 5.0 HO March/10
1988 Ford Mustang 5.0 HO March/10
0 2010/07/01 21:57:42
1988 Ford Mustang 5.0 HO April/10
1988 Ford Mustang 5.0 HO April/10
0 2010/07/01 21:57:42
0 2010/07/01 21:57:42
1988 Ford Mustang 5.0 HO Jan/10
1988 Ford Mustang 5.0 HO Jan/10
0 2010/07/01 22:01:41
New front brakes drilled rotors,hawk pads,stock calipers and hoses,bearings / nickel plated coper lines installed front and rear w/new master cylinder installed new Valvoline brake fluid added March/10
New front brakes drilled rotors,hawk pads,stock calipers and hoses,bearings / nickel plated coper lines installed front and rear w/new master cylinder installed new Valvoline brake fluid added March/10
0 2010/07/01 22:01:41
1988 Ford Mustang 5.0 HO new Mid pipe Feb/10
1988 Ford Mustang 5.0 HO new Mid pipe Feb/10
0 2010/07/01 22:01:41
Milkshake motor oil
Milkshake motor oil
0 2010/07/01 22:07:10
Beggining engine teardown
Beggining engine teardown
0 2010/07/01 22:07:10
Buffed and Polished stock valve covers
Buffed and Polished stock valve covers
0 2010/07/01 22:26:49
New Motorcraft spark plugs from the original dealership 130,000 km's 22 yrs later
New Motorcraft spark plugs from the original dealership 130,000 km's 22 yrs later
0 2010/07/01 22:26:49
buffed sanded and painted stock factory headers with a small spot weld reapiar paint used was krylon high temp black paint
buffed sanded and painted stock factory headers with a small spot weld reapiar paint used was krylon high temp black paint
0 2010/07/01 22:26:49
Removed left cylinder head
Removed left cylinder head
0 2010/07/01 22:43:41
cleaned and painted
cleaned and painted
0 2010/07/01 22:43:41
right 1-2-3-4 cylinders
right 1-2-3-4 cylinders
0 2010/07/01 22:43:41
Right Cylinders cleaned and lubricated with Lucas upper cylinder lubricant
Right Cylinders cleaned and lubricated with Lucas upper cylinder lubricant
0 2010/07/01 22:48:19
Lower intake removed
Lower intake removed
0 2010/07/01 22:48:19
Lower intake after a varsol cleaning
Lower intake after a varsol cleaning
0 2010/07/01 22:48:19
Ford racing graphite gaskets
Ford racing graphite gaskets
0 2010/07/01 22:51:22
Lower intake to blocks rear seal was not correctly seated when last installed, I cleaned the area behind the engine block which was causing oil to drip off of the clutch plate, When I installed the new cork gasket I used loctite on the lower side with motorcraft silicone sealant on top of the front and rear gaskets and to hold the gasket in place while installing the lower intake to block
Lower intake to blocks rear seal was not correctly seated when last installed, I cleaned the area behind the engine block which was causing oil to drip off of the clutch plate, When I installed the new cork gasket I used loctite on the lower side with motorcraft silicone sealant on top of the front and rear gaskets and to hold the gasket in place while installing the lower intake to block
0 2010/07/01 22:51:22
Upper cylinder heads installed after cleaning my roller lifters rods/rockers installed set and torqued to spec
Upper cylinder heads installed after cleaning my roller lifters rods/rockers installed set and torqued to spec
0 2010/07/01 22:51:22
Mustang head gasket repair 122
Mustang head gasket repair 122
0 2010/07/01 22:58:55
Mustang head gasket repair 125
Mustang head gasket repair 125
0 2010/07/01 22:58:55
Mustang head gasket repair 129
Mustang head gasket repair 129
0 2010/07/01 22:58:55
Lower gaskets installed
Lower gaskets installed
0 2010/07/01 22:59:25
Lower intake installed
Lower intake installed
0 2010/07/01 22:59:25
Distributor installed to original position TDC which was difficult
Distributor installed to original position TDC which was difficult
0 2010/07/01 22:59:25
After 22 hrs of sanding and polishing
After 22 hrs of sanding and polishing
0 2010/07/01 23:05:27
Installed
Installed
0 2010/07/01 23:05:27
Flushed transmission fluid, power steering fluid and rear end fluid with friction modifier added
Flushed transmission fluid, power steering fluid and rear end fluid with friction modifier added
0 2010/07/01 23:05:27
Rims before
Rims before
0 2010/07/01 23:08:48
10 hrs each rim method of 3 steps of sanding and polishing
10 hrs each rim method of 3 steps of sanding and polishing
0 2010/07/01 23:08:48
Rear end before flush
Rear end before flush
0 2010/07/01 23:08:48
Rear end after flush, buffed and painted
Rear end after flush, buffed and painted
0 2010/07/02 21:24:26
0 2010/07/02 21:24:26