Mach 1 Powered foxbody

May 18, 2012

9

0

2004 Mach 1 motor, T-56 with Centerforce DFX clutch, SN95 rear end with disks, M2400 Cobra brake kit, Team-z K-member and A-Arms, Qa1 Coilovers and adjustable shocks and struts. Vortech JT trim is staying odd for the summer while a build a forged motor. Read more »

What's a custom car without vanity plates :) I was surprised it was available due to the number of modular powered fox's around.

What's a custom car without vanity plates :) I was surprised it was available due to the number of modular powered fox's around.

0 2012/05/18 13:04:02 Speedtospa

Rear clearance on the coilovers.

Rear clearance on the coilovers.

0 2012/05/18 13:04:02 Speedtospa

SN95 rearend with QA1 adjustable shocks, UPR Coilovers, Springs are 150Lb.

SN95 rearend with QA1 adjustable shocks, UPR Coilovers, Springs are 150Lb.

0 2012/05/18 13:04:02 Speedtospa

Car waiting for the wiring harness from RJM. Taking forever.

Car waiting for the wiring harness from RJM. Taking forever.

0 2012/05/18 12:59:50 Speedtospa

2004 Aviator heads (same a mach cobra, marauder etc) I swapped the intake cams to 96 Cobra. they have almost 20 degrees more duration that the stock 04 Cobra cams. All exhaust cams were identical.

2004 Aviator heads (same a mach cobra, marauder etc) I swapped the intake cams to 96 Cobra. they have almost 20 degrees more duration that the stock 04 Cobra cams. All exhaust cams were identical.

0 2012/05/18 12:59:50 Speedtospa

17x9.5" Billet Street. Because of the SN95 rear a 7" offset is required to allow the rims to fit.

17x9.5" Billet Street. Because of the SN95 rear a 7" offset is required to allow the rims to fit.

0 2012/05/18 12:59:50 Speedtospa

Pretty much complete in this picture. Just finishing up the cooling system.

Pretty much complete in this picture. Just finishing up the cooling system.

0 2012/05/18 12:56:47 Speedtospa

T-56 out of a 2004 Cobra

T-56 out of a 2004 Cobra

0 2012/05/18 12:56:47 Speedtospa

Started it life an an Aviator motor. Swapped to a 2004 Mach 1 intake, and 96 Cobra cams.

Started it life an an Aviator motor. Swapped to a 2004 Mach 1 intake, and 96 Cobra cams.

0 2012/05/18 12:56:47 Speedtospa