KingLX

I have a 1990 GT Convertible. I have a set of wheels that came off another car. I am going to do the 5 lug conversion, which will give me 5x114.3mm. However, the wheels are 5x130mm, and I know backspacing is okay. Here are my questions -

1) Can I get rotors and/or rear axles for a 90 GT that have 5x130mm bolt pattern (instead of 5x114.3)?

2) I thought about wheel adapters, but I was told they will add another 1-1/4" to 1-1/2" on each side. Is this very noticeable. (I don't think it will work anyways as the wheels are 17x10 in the rear)

3) I have heard of places that can actually change the bolt pattern on wheels. Is this a good idea? Is it possible? Is it expensive? Is it safe?

If anyone has any other ideas, I'd really appreciate it. It would really be alot easier if I could just get the rotors and axles in 5x130mm.

Thanks for the help.

petereggy

what rims are they?

the 5 lug pattern off 94+ is 5x4.5 inches

Blownstude

4.5 is 114.3mm. Too expensive to modify axles. Just get the proper wheels. Cheaper in the end and then you don't have some bastard mix.