Clear Corners 'HOW TO'
Found this ...
http://www.fnsweet.com/garage/clears.shtml How to take the yellow out of the corners (lights) |
Thanks, that's a great read for people wanting to do this mod. :tup
|
Put them in the oven. A lot cleaner, a lot easier...
|
Originally Posted by meister@steeda.ca
Put them in the oven. A lot cleaner, a lot easier...
|
I'm still leary about wrecking one of the lights or I'd try it! :rolleyes:
|
paul at steed.ca is an old pro at this - when he sees this thread - he will fill in the details - the oven method that is :)
|
Take your light and put er in the oven at about 350F. Put it in for about 25min and yank it out and see if the glue has melted enough to wedge something between the black plastic and the lense cover. Use a towel on whatever you wedge between the back and cover so you do not scratch the inside.
If it is not coming off EASY, put it in longer. You will be able to EASILY peel back the black backing....once this is done, the amber will simply pop out by wedging something under it (again, use a clotch as protection) Clean the inside, etc...put it back in the over to get the plastic warm enough to bend it back.....bend it back, clamp it and silicon it. VOILA! |
1 Attachment(s)
Any tips for getting headlights out? lol
Ive been trying the last two days to remove mine. when you turn the nuts the whole thing turns! what a pita! :banghead: Edit! Got them off! i pulled a dumbass and didnt realize they unscrew both ways :banghead: :tup |
Originally Posted by meister@steeda.ca
Take your light and put er in the oven at about 350F. Put it in for about 25min and yank it out and see if the glue has melted enough to wedge something between the black plastic and the lense cover. Use a towel on whatever you wedge between the back and cover so you do not scratch the inside.
If it is not coming off EASY, put it in longer. You will be able to EASILY peel back the black backing....once this is done, the amber will simply pop out by wedging something under it (again, use a clotch as protection) Clean the inside, etc...put it back in the over to get the plastic warm enough to bend it back.....bend it back, clamp it and silicon it. VOILA! |
All times are GMT -5. The time now is 07:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands