Clear Corners 'HOW TO'
02-06-2005, 07:30 PM
#1
CMOC Addict
Thread Starter
Join Date: Oct 2004
Location: on the bottom!
Posts: 711
Clear Corners 'HOW TO'
Found this ...
http://www.fnsweet.com/garage/clears.shtml
How to take the yellow out of the corners (lights)
http://www.fnsweet.com/garage/clears.shtml
How to take the yellow out of the corners (lights)
02-07-2005, 10:11 PM
#7
CMOC Addict
Join Date: Oct 2004
Posts: 536
Take your light and put er in the oven at about 350F. Put it in for about 25min and yank it out and see if the glue has melted enough to wedge something between the black plastic and the lense cover. Use a towel on whatever you wedge between the back and cover so you do not scratch the inside.
If it is not coming off EASY, put it in longer. You will be able to EASILY peel back the black backing....once this is done, the amber will simply pop out by wedging something under it (again, use a clotch as protection)
Clean the inside, etc...put it back in the over to get the plastic warm enough to bend it back.....bend it back, clamp it and silicon it. VOILA!
If it is not coming off EASY, put it in longer. You will be able to EASILY peel back the black backing....once this is done, the amber will simply pop out by wedging something under it (again, use a clotch as protection)
Clean the inside, etc...put it back in the over to get the plastic warm enough to bend it back.....bend it back, clamp it and silicon it. VOILA!
02-08-2005, 09:22 AM
#8
CMOC Veteran
Join Date: Nov 2004
Location: Nova Scotia
Posts: 326
Any tips for getting headlights out? lol
Ive been trying the last two days to remove mine. when you turn the nuts the whole thing turns! what a pita!
Edit! Got them off! i pulled a dumbass and didnt realize they unscrew both ways
Ive been trying the last two days to remove mine. when you turn the nuts the whole thing turns! what a pita!
Edit! Got them off! i pulled a dumbass and didnt realize they unscrew both ways
Last edited by Scotts88; 02-08-2005 at 06:55 PM.
02-08-2005, 09:34 AM
#9
CMOC Addict
Thread Starter
Join Date: Oct 2004
Location: on the bottom!
Posts: 711
Originally Posted by meister@steeda.ca
Take your light and put er in the oven at about 350F. Put it in for about 25min and yank it out and see if the glue has melted enough to wedge something between the black plastic and the lense cover. Use a towel on whatever you wedge between the back and cover so you do not scratch the inside.
If it is not coming off EASY, put it in longer. You will be able to EASILY peel back the black backing....once this is done, the amber will simply pop out by wedging something under it (again, use a clotch as protection)
Clean the inside, etc...put it back in the over to get the plastic warm enough to bend it back.....bend it back, clamp it and silicon it. VOILA!
If it is not coming off EASY, put it in longer. You will be able to EASILY peel back the black backing....once this is done, the amber will simply pop out by wedging something under it (again, use a clotch as protection)
Clean the inside, etc...put it back in the over to get the plastic warm enough to bend it back.....bend it back, clamp it and silicon it. VOILA!
Thread
Thread Starter
Forum
Replies
Last Post
Roadkiller
Mustang Drag Racing & Road Racing
8
11-19-2004 05:21 PM
