Double Hump Crossmember
Been around FEP, and someone is selling a double hump cross member (I'm looking at putting a dual exhaust on my Crimson Cat), just curious what you guys think? Should they work? 20 bucks for em!
http://i675.photobucket.com/albums/v...3/IMG_0993.jpg |
Looks like the measurements are right. 4.5inches in between brackets
|
Not sure. Forgive my stupidity but what do they do? :)
|
Basically so the dual exhaust will fit... my stock one won't work.. (since it's a single exhaust)
It's right under the tranny |
Ahhhh...OK!! Are they a direct bolt in and are you going with a dual set up?
|
Originally Posted by Kaisoboy
(Post 114512)
Ahhhh...OK!! Are they a direct bolt in and are you going with a dual set up?
|
They are a direct bolt on!!Can't go wrong with that price,you want the top one,as it has the proper location,the lower one doesn't.Look good to!!Snag it up!:tup
Just for future reference,a mustang from '79 to '93,including the Capri's,about 99% of everything will interchange.:wink: |
Originally Posted by 1LOW03GT
(Post 114537)
They are a direct bolt on!!Can't go wrong with that price,you want the top one,as it has the proper location,the lower one doesn't.Look good to!!Snag it up!:tup
Just for future reference,a mustang from '79 to '93,including the Capri's,about 99% of everything will interchange.:wink: then i would say the capri would look sweet with dual pipes...:tup Do it!! Do it!!:chacha::wiggle::chacha: |
Originally Posted by 1LOW03GT
(Post 114537)
They are a direct bolt on!!Can't go wrong with that price,you want the top one,as it has the proper location,the lower one doesn't.Look good to!!Snag it up!:tup
Just for future reference,a mustang from '79 to '93,including the Capri's,about 99% of everything will interchange.:wink: |
By the looks of the bottom one,somebody must've cut the spot welds on the tubes to use for a different trans,and slid it down,it might not even be welded back up,which is fine,and can be used,all you would need to do is get it all bolted up to your Capri,and re weld the tubes,and cross piece back together.Not really a big deal,just an extra step not needed if it can be avoided.But they both look really good.
|
All times are GMT -5. The time now is 10:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands