General Mustang Tech & Chat This Forum is for General Mustang Tech that fits both suspension, exhaust, wheels, tires and more. General Mustang chat / banter is welcome as well.

Electronic rust inhibitor - any recommendations?

Old Dec 23, 2012 | 06:51 AM
  #11  
Apocalypse Pony's Avatar
Adminut
 
Joined: May 2009
Posts: 5,722
From: Maple Tree, Branch #2 above the rope swing
Originally Posted by Preach3r
Listen to this guy!!!!!!
I had a rust inhibitor on my last vehicle (fell for the business office sales pitch)
Not only did it NOT prevent rust but when I brought the car in he told me that my rust was from the outside in and that it had not perforated the interior side of the metal... Therefore it fulfilled it's warrantable promise. Retarded right!!!
Just get it rust checked. They guarantee their work and it won't damage any part of your car.
There's more small print that says if yearly inspections aren't done and actually registered with the company they don't have to honour squat. Like I said before, scam scam scam. I had an elderly neighbour that got ripped off for any sort of coverage for that exact reason, they said she never had it inspected and registered yearly, therefore the electronic rust module company didn't have to pay anything for damage that occurred. Freaking criminal.
Old Dec 23, 2012 | 07:06 PM
  #12  
1low03gt's Avatar
Administrator
 
Joined: Jan 2005
Posts: 17,778
From: Ontario
Originally Posted by Speedtospare
Take it to Krown each year, done.
X's 2!!!
Old Jan 1, 2013 | 05:41 PM
  #13  
VAEM's Avatar
Retired Admin
 
Joined: Oct 2009
Posts: 4,821
From: Barrie, Ontario
^^^ That's what I do.
Old May 13, 2014 | 01:51 PM
  #14  
Cshutt972's Avatar
CMOC Newbie
 
Joined: May 2014
Posts: 3
From: Toronto
I'm interested in installing some rust protection, but I don't wanna go with the dealership's offer - it's really overpriced. If I go to an independent local guy, am I at risk of voiding my warranty?
Old May 13, 2014 | 10:37 PM
  #15  
ChadStang's Avatar
Moderator
 
Joined: Aug 2005
Posts: 6,871
From: Slave Lake, AB
Originally Posted by Cshutt972
I'm interested in installing some rust protection, but I don't wanna go with the dealership's offer - it's really overpriced. If I go to an independent local guy, am I at risk of voiding my warranty?
I really can't see hoe you would have warranty issue, unless they physically damage something during the process.
Old Jun 5, 2014 | 07:04 PM
  #16  
totaljustice's Avatar
CMOC Rookie
 
Joined: Sep 2012
Posts: 76
From: Middle Sackvegas, Nova Scotia
Read the article below these are snake oil. They do work but only if the metal is constantly immersed in water like when it's installed on a ship.

http://www.theglobeandmail.com/globe...article535224/
Old Jun 18, 2014 | 10:42 AM
  #17  
Cshutt972's Avatar
CMOC Newbie
 
Joined: May 2014
Posts: 3
From: Toronto
I found a great article in the globe and mail (http://www.theglobea.../article535224/) showing how overpriced the erp's are when the dealer sells them. so i decided to check out the krown blog to hear their thoughts on electronic rust proofing (Thinking of Electronic Rust Protection? Think again..) and came across the list of products recommended by the Automobile Protection Agency - thought I should post it here for folks:

http://www.apa.ca/se...ustproofing.asp

They give a pretty good run-down on how dealers profit but drivers are overcharged with these devices. They also list some trusted rustproofers from Canada.
Old Jun 18, 2014 | 11:17 PM
  #18  
ChadStang's Avatar
Moderator
 
Joined: Aug 2005
Posts: 6,871
From: Slave Lake, AB
Originally Posted by Cshutt972
I found a great article in the globe and mail (http://www.theglobea.../article535224/) showing how overpriced the erp's are when the dealer sells them. so i decided to check out the krown blog to hear their thoughts on electronic rust proofing (Thinking of Electronic Rust Protection? Think again..) and came across the list of products recommended by the Automobile Protection Agency - thought I should post it here for folks:

http://www.apa.ca/se...ustproofing.asp

They give a pretty good run-down on how dealers profit but drivers are overcharged with these devices. They also list some trusted rustproofers from Canada.
The link doesn't work for the apa list
Old Jun 19, 2014 | 03:08 AM
  #19  
Cshutt972's Avatar
CMOC Newbie
 
Joined: May 2014
Posts: 3
From: Toronto
Originally Posted by ChadStang
The link doesn't work for the apa list
my mistake! hope this works.. Automobile Protection Association | Services - Rustproofing
Old Oct 17, 2014 | 09:14 AM
  #20  
Windstang's Avatar
CMOC Rookie
 
Joined: Jan 2013
Posts: 31
From: Calgary
I tried the electronic module from Crappy tire which I think is the same thing as the dealers now sell. It drained the battery (over time) so I disconnected it. I contacted the manufacturer and they said the draw was normal.
I think the concept was decent - pipelines use cathodic protection systems to prevent corrosion so I thought I'd try it. There is a small constant draw on the battery and according to the manufacturer will not be a problem but it killed my OEM battery after a few years and if I let it sit for 2 weeks the battery wouldn't start the car. I believe the battery should last for about 5 years so I blame the early failure on this constant small load, nor did it seem to stop the rust on the undercarriage or rotors etc.
I have used the Rustcheck product in a can from Crappy Tire also and that seems to work OK on body and door panels but not really on the undercarriage. I have also used that black underbody undercoating but it seems to peel off. A few years ago I did a roof repair and found (also at Crappy Tire) a spray roof repair. Yup - I read the label and it says 'Inhibits rust' so I tried it on the car and found that it works great and doesn't peel as the other stuff does and pretty much stays on - of course not on the rotors which I just paint now. It is in the roof repair section at CT and is made by Black Knight. A spray can costs about $9 and is also available in white and aluminium colours.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bstevens39
Show, Shine & Audio
16
Dec 30, 2008 08:11 PM
89LXBlack
4.6L 4v
12
Nov 4, 2004 10:25 AM



All times are GMT -5. The time now is 05:40 AM.