Engine dress up kits?
 

Can anyone offer me advice on where I might buy an engine dress up kit in chrome for my 96 GT? I'd prefer to order Canadian if possible. Any advice appreciated.

Not available for the 4.6L, you can get aluminum cam covers from BBK and a few other companies, but they're big bucks.

Check our sponsors on the home page at the bottom. 2KOOLPERFORMANCE can get you anything you want but he imports it for you. Saves a lot of hasles. Check out Steeda as well. Good luck.thumb:

Sorry I just noticed you were from down east, Iam not familiar with suppliers there 2 KOOL is in eastern Ontario but ya good luck.

yeah.....either of the board sponsors should be able to get the stuff to you

most of the stuff is polished aluminum, not chrome

for caps and covers......both Steeda and UPR seem to make alright stuff.....and I think they sell complete kits

for cam covers on the 4.6 (aka valve covers) Team Breed makes a nice set of polished pieces

for tanks (coolant and power steering).....Canton all the way.....but you have to polish or chrome on your dime

Thanks
 

Thanks for the advice, folks. UPR in the states has quoted me on a whole package (much cheaper than buying each cap and cover separately) but I was hoping to buy Canadian.

any and all Cdn. dealers can and will get UPR stuff......I have quite a few of their bits on my ride and have only bought from local Cdn shops

Misner Motorsports deals with UPR.

Check our sponsors for more information

Steeda.com, Themustangshop.com, 2koolperformance.com, mustangtoystore.com

So many great places out there....Good luck :)

every piece bought and installed in Canada....ordered through Cdn shops (some of the pieces were custom-fabbed in Canada....by Canadians...lol)

http://www.mustangmods.com/ims/u/141/140/67111.jpg

http://www.mustangmods.com/ims/u/141/140/107218.jpg

http://www.mustangmods.com/ims/u/141/140/187250.jpg

thumb: ^^^ now that's what I'm talkin about! Nicely done!^^^^

^^^....appreciate that

here's what Canadian's do

want a blinged out master-cylinder for a modern Stang?.....can't find one?......give a Ford factory master-cylinder to a Canadian....and here's what you get

http://www.mustangmods.com/ims/u/141/140/213760.jpg

want a cover to bling out that ugly plastic factory fluid reservoir?......can't find one anywhere in the states???........give it to a Canadian

http://www.mustangmods.com/ims/u/141/140/213761.jpg

if ya can't find it in the states.....BFD...you can make it herethumb:

Thats some nice work there, who did it for you?

the master-cylinder work?

JuMPy from the GTAMC did the polishing on both the MC and the reservoir cover

the reservoir cover itself was a combined effort...myself and Pat Arlia from Steeda.ca....my idea, design and per$i$tence....Pat arranged the fabricating and delt with me bitching for 3 months

came out looking real good

in my motor pics.....the billet Alternator bracket was all Steeda.ca/MPW....I was swapping alts for the PerformanceWorld Show in 2005....the 130amp stocker for a chrome 200amp powermaster......and the stock bracket wouldn't fit......so Mike Grella (MPW) got busy and fabbed that bracket......he also fabbed my CPR fuel rail on the passenger side to clear the blower

lots of very talented Canadian folks that can easily raise the bar......and we're spoiled here in southern Ontrockon: