Sounds like it should come together nicely.

 

Here are a few sound clips with the new Borla Resonator Delete Mid Pipes.

Resonator delete mid pipes cold start up.


Resonator delete mid pipes with Redkey Track idle (Ghost cam)

 

Sounds good, would love to hear it wound out!

 

+1 on that, sounds sweet.

 

Well, finally got the Borla X pipe with fabbed in side exits installed. Was a bit of a pain. Couldn't image doing it laying down under the car on jack stands. Car now has a full 2 3/4 inch exhaust front to back, the way these cars should have been built, IMO. I had a welder friend of mine fabbed the side exits in stainless. Everything is stainless now behind the cats, except for the side pipes, which I will get fabbed this winter to exit out under the rocker panel in front of the rear wheels, instead of bent flat and hidden. I also changed my twin tip GT500 exhaust and installed Roush mufflers. It is really loud now, maybe to loud, NOT. Probably a few neighbors don't like it, but with several car guys and gals on my street, I'm not worried about it. I will try to get a cold start up sound clip done and one with track idle engaged soon.

 

Looks and sounds great, bet it sounds even better once past 3000 rpm under load

 

Nice looking install. I need a lift like that in my garage.....only way that'll happen is if I could convince the wife to park in the driveway or get a bigger garage.

Neither one is happening any time soon. lol Waiting on the sound clip.

 

Sound clip for my Borla X pipe with fabbed in side exits, Borla Resonator Delete Mid Pipes, Roush Axle Back on my 2013 Boss 302.

 

Eargasm, lordy that sounds good, can't imagine how good when its spooled up under load.

 

Here is what I did for the x pipe if anyone is interested.

I bought a Borla X Pipe part number 60513 from Amazon, about 2 feet of 2 inch stainless exhaust pipe from an exhaust shop, and 2 Vibrant exhaust flanges part number 1470S from Jegs. My welder used the stock H-Pipe as a template to weld in the side exits on to the x pipe. You will also need 4 bolts 3/8“ at least 2 1/4” long, 4 bolts, 8 flat washers and 4 lock washers, of course 3/8”. I also previously installed Borla mid pipes part number 60521 that I got from Amazon. The side pipes are stock.