Canadian Mustang Owners Club - Ford Mustang Forums

Canadian Mustang Owners Club - Ford Mustang Forums (https://www.cmoc.ca/)
-   General Mustang Tech & Chat (https://www.cmoc.ca/general-mustang-tech-chat-46/)
-   -   Looking for 19"+ RIMs and Performance Tires (https://www.cmoc.ca/general-mustang-tech-chat-46/looking-19-rims-performance-tires-11062/)

wpgfordguy 12-08-2008 04:46 PM

Borrowed from Mustang Evolution.com


Mustang Wheels and Tires FAQ: Come here for questions concerning tire size!!

--------------------------------------------------------------------------------

I figured Id post a thread of all the stock tire sizes that were offered on the Mustang throughout the years, and help end some of the confusion that is overly prevelent when it comes to figuring out what tire size you need.

V6 MODEL WHEELS[/B]
These are the STOCK original equipment tire sizes for the following years:

1994-1998 - (15" wheels) 205/65-15
1999-2004 - (15" wheels) 205/65-15, (16" wheels) 225/55-16
2005-2007 - (Without Pony Package) 215/65-16, (With Pony Package) 235/55-17


[B]GT MODEL WHEELS
These are the STOCK original equipment tire sizes for the following years:

1994-2004 - (16" wheels) 225/55-16, (17" wheels) 245/45-17
2005-2007 - (17" wheels) 235/55-17, (18" wheels) 235/50-18

COBRA MODEL WHEELS
These are the STOCK original equipment tire sizes for the following years:

1994-1995 - 255/45-17
1996-1998 - 245/45-17
1999/2001 - 245/45-17
2003-2004 - 275/40-17

SPECIALTY MUSTANGS
These are the STOCK original equipment tire sizes for the following years:

1995 Cobra R - 255/45-17
2000 Cobra R - 265/40-18
Bullitt Mustang - 245/45-17
Mach1 - 245/45-17
1999-2004 Saleen - (Front 18x9") 265/35-18, (Rear 18x10") 285/35-18
2007 Shelby GT500 - (Front) 255/45-18, (Rear) 285/40-18

AFTERMARKET WHEELS AND TIRES
Now that I've covered most stock wheel/tire combo's, I'll move on to explain sizing your tires to your aftermarket wheels. Aftermarket wheels generally come in 5 sizes. These sizes are as follows:

17x8"
17x9"
17x10.5"
18x9"
18x10"

The tires you want to fit to each of these sizes are as follows:

17x8" - 245/45-17 or 255/45-17
17x9" - 275/40-17
17x10.5" - 315/35-17
18x9" - 265/40-18 or 275/35-18
18x10" - 295/35-18 or 305/30-18 or 315/30-18


You might be asking yourself what all these numbers even mean, so Ill explain it. We'll use a size 245/45-17 as an example. Now the first number (245) is the width of the entire tire. Some confuse this as the width of the tread, and thats not right. It is measured in millimeters and should be coordinated with your rim size as to how wide of a tire you buy. The second number (45) refers to the tires aspect ratio. This means that the sidewall height is 45% of your tire width, so this tire's sidewall is 45% of 245 millimeters. This number is extremely important in keeping your stock tire diameter in the same general size. By not keeping the same total tire diameter, it will throw your speedometer off, and not look correct. The third number is the size of your rim, so in this case the "17" refers to a 17" wheel.

Remember, there's a REASON Ford put 275 wide tires on their 2003-2004 cobras boasting 17x9" rims. This reason is that because those tires cover the rim with ample protection. If a 245 or 255 was the correct size tire on a 17x9" rim, you would most likely see that size tire on those wheels from the factory. As you know, they aren't there from the factory... and that is because they're TOO SMALL. Don't screw up a perfectly good set of wheels because you went and skimped on the tires. It doesn't make sense to put tiny tires on a big wheel. It would be the same thing as if someone put a bicycle tire on their motorcycle, it just makes no sense, so don't do it. If you can't afford the tires, then you can't afford the rims. Simple as that.

Some things to keep in mind when buying tires, is be SURE to get a tire wide enough for the wheel you're putting it on. If you buy a tire that is too narrow for the rim, it may fit... but it's not going to offer the required width to keep your wheel protected in the unfortunate incident that you may curb your rim out. Spending a little more on a tire is certainly worth the self-gratification that if you do hit a curb, its not going to ruin your rim. A little more on a tire is certainly worth the $150 or more you'd have to spend on replacing a wheel if it is damaged due to insufficient protection. Remember, you get what you pay for when it comes to tires. If you spend more, you're going to get a better performing tire. Dont expect the 65 dollar special to outhandle a 200 dollar michilin of the same size, its just not going to happen.


Now hopefully this helps some people out in the future, if you have questions about a size thats not listed here, you may need to do some research yourself, or post here and we'll see if your questions can be answered.

SNAKEBITE 12-08-2008 09:41 PM


Originally Posted by hujirong (Post 99402)
Yours look good. Have you lowered your car?

But if I use a performance tire (thin), it looks too small. There are lots of rooms between the fender and the tires. Look at this, I am using the original 18" RIM with a performance winter tire:

http://picasaweb.google.ca/jirong.hu...21489139076818

http://lh5.ggpht.com/_GsJI1jtjTyk/SS...0/IMG_1239.JPG

Roush rims with Michelin Pilots and lowered the pony 1 1/2 inches:chacha:


All times are GMT -5. The time now is 06:49 AM.


© 2024 MH Sub I, LLC dba Internet Brands