Off to the wreckers
12-08-2012, 05:17 AM
#1
Off to the wreckers
So, it's been a while since I needed to go parts hunting. My current daily, and my last mustang didn't need anything, and are fairly new. So, I'm pretty stoked.
Put my wrecker tool bag back together, made a shopping list, called up a couple buddies, and away we go to London ON, where there are a few spots in one area, and the prices seem to be fair.
The main thing on my radar is the front spindles from a 94 or 95, as the previous owner of this fox, just used front rotors in his swap, and the centre caps on my 18" cobra wheels won't clear the dust cap on the rotor. And, even tho he chose to run 245's in the front, they seem to be out further than they should. After reading a brilliant write up on the job, I am going to under take the swap.
I also need a bunch of oem screws, clips, and a few interior parts. I am hoping to find a black Interior but I'm sure it's gonna be tough. I'll take some pics, and post any cool finds in case anyone is looking for something. You always get to see some cool stuff, and some wild wrecks, and it is a fun day out with the boys to boot
Put my wrecker tool bag back together, made a shopping list, called up a couple buddies, and away we go to London ON, where there are a few spots in one area, and the prices seem to be fair.
The main thing on my radar is the front spindles from a 94 or 95, as the previous owner of this fox, just used front rotors in his swap, and the centre caps on my 18" cobra wheels won't clear the dust cap on the rotor. And, even tho he chose to run 245's in the front, they seem to be out further than they should. After reading a brilliant write up on the job, I am going to under take the swap.
I also need a bunch of oem screws, clips, and a few interior parts. I am hoping to find a black Interior but I'm sure it's gonna be tough. I'll take some pics, and post any cool finds in case anyone is looking for something. You always get to see some cool stuff, and some wild wrecks, and it is a fun day out with the boys to boot
12-08-2012, 12:14 PM
#4
it was fun. one spot wanted 125 a side for spindles and calipers. the next was 60 bux a side, pulled for me. done. found a couple things for the interior, not much tho. i did find that 94 hvac control ***** fit a 93 fox.
Thread
Thread Starter
Forum
Replies
Last Post
S_A_W
Standard Auto Wreckers
0
07-31-2013 08:17 AM
S_A_W
Standard Auto Wreckers
1
09-13-2012 12:17 PM
