rear seat floorpan and frame rails
05-19-2010, 04:25 PM
#1
CMOC Newbie
Thread Starter
Join Date: May 2010
Location: pei
Posts: 9
rear seat floorpan and frame rails
im in serious need of some rear frame rails and back seat floor pans!! iv been looking around but i cant seem to find these parts. iv been told that im gunna have to fab sumthing up :/ this sounds time consuming. does anyone know where i can track this stuff down?
05-19-2010, 05:49 PM
#2
Retired Admin
Join Date: Oct 2009
Location: Barrie, Ontario
Posts: 4,821
Funny, I just had a conversation about this with the guy doing bodywork on one of our Mustangs. He's got a firebird in the shop that's in desperate need of both floor pans and frame rails - both were completly rotten / rusted out. Custom fabrication is a good option but you can buy them.
Last edited by VAEM; 05-19-2010 at 06:17 PM.
05-19-2010, 06:16 PM
#3
Retired Admin
Join Date: Oct 2009
Location: Barrie, Ontario
Posts: 4,821
Sorry, I just realized I didn't finish answering your question. You can buy new floor pans and frame rails here:
YearOne, Inc.
Frame rails - http://www.yearone.com/serverfiles/f...rails&SM=1&SC=
Floor pans - http://www.yearone.com/serverfiles/f...r+pan&SM=1&SC=
Good luck.
YearOne, Inc.
Frame rails - http://www.yearone.com/serverfiles/f...rails&SM=1&SC=
Floor pans - http://www.yearone.com/serverfiles/f...r+pan&SM=1&SC=
Good luck.
05-19-2010, 09:19 PM
#4
Administrator
Join Date: Jan 2005
Location: Ontario
Posts: 17,778
If you go to your local wrecking yard,you might be able to find yourself a mint donar stang.Some owners out there undercoat here vehicles religiously year in,and year out,but once they start to malfunction mechanically to the point where it cost more then the car is worth,so they dump them at the wrecking yards.I know from expirience when i was once helping a friend looking for a front half of a stang as he needed the rad craddle,and front frame rail dew to rusting out,that there is some treasures out there.Just need to look.
Once you find one,just cut,align,and weld.
Once you find one,just cut,align,and weld.
05-20-2010, 02:30 PM
#6
CMOC Newbie
Thread Starter
Join Date: May 2010
Location: pei
Posts: 9
ilow03gt, i tottaly agree. i could save a bundle, however, i would rather spend the money then the time right now...not that i have alot of either. i wanna get the car done asap. vaem, thanks for the link, ill def check them out.
05-22-2010, 12:55 PM
#9
CMOC Addict
Join Date: Apr 2006
Location: Fergus Ontario
Posts: 671
Jeff at Mustang Specaialteaz has lots of old wrecks at his place one might be solid enough to back half it. Save a load of time and $$
Hear The Thunder - Mustang Specialteaz
Hear The Thunder - Mustang Specialteaz
Thread
Thread Starter
Forum
Replies
Last Post
89lxstanger
Mustang Related Want To Buy
4
02-24-2011 07:57 AM
jonesy13
General Mustang Tech & Chat
1
05-08-2007 11:52 AM
BOTTLFED
Mustangs for sale
7
04-09-2006 07:43 PM
