General Mustang Tech & Chat This Forum is for General Mustang Tech that fits both suspension, exhaust, wheels, tires and more. General Mustang chat / banter is welcome as well.

Switching from normal atf to synthetic atf quesions?

Thread Tools
 
Old 07-07-2009, 04:23 PM
  #1  
CMOC Rookie
Thread Starter
 
wannabesaleen281's Avatar
 
Join Date: Jan 2009
Location: airdrie
Posts: 193
Switching from normal atf to synthetic atf quesions?

Hi i was hoping someone could answer some questions for regarding tranny fluid.I want to switch from regular tranny fuild to royal purple tranny fluid what is involved in switching it and how many litres would i need?Any info would help alot i am getting a tranny flush today and at first they told me all i needed was 4L of tranny fluid to swap over and then in the morning i dropped my car off they said i needed 16L of royal to swap it out(which is very expensive).Any info would be greatfull am i getting burnt or what?
wannabesaleen281 is offline  
Old 07-07-2009, 05:06 PM
  #2  
CMOC Veteran
 
Kaisoboy's Avatar
 
Join Date: Jun 2009
Location: Calgary, AB
Posts: 465
Originally Posted by wannabesaleen281
Hi i was hoping someone could answer some questions for regarding tranny fluid.I want to switch from regular tranny fuild to royal purple tranny fluid what is involved in switching it and how many litres would i need?Any info would help alot i am getting a tranny flush today and at first they told me all i needed was 4L of tranny fluid to swap over and then in the morning i dropped my car off they said i needed 16L of royal to swap it out(which is very expensive).Any info would be greatfull am i getting burnt or what?
The trani may take less than or equal to 4L but it is the process in which they do it that requires 16L. They will use a evac circulation system (machine) that they will have to empty, then fill with your royal purple trani fluid. They then connect the hoses to your trani flow tubes and run the machine circulating clean fluid and old until clean fluid is present in the out flow tube or sump bin of the machine. So yes it will be expensive swap.
Kaisoboy is offline  
Old 07-07-2009, 08:49 PM
  #3  
CMOC Veteran
iTrader: (1)
 
kena's Avatar
 
Join Date: Mar 2008
Location: Canmore, Alberta
Posts: 365
Your transmission may only hold 4 liters in the pan however with the torque converter. lines and cooler and such I would expect 12 or so liters is it's capacity. With a full flush of the system draining your old and adding a completely new type of fluid that is why they are quoting so much fluid. The fluid flushing machine will also hold a couple of liters almost of the new fluid and some goes to waste pushing the old fluid out until it runs clear and the old dirty stuff is gone.

It is possible they quoted you 4 liters for a "pan change" which is often done (drain the pan and add new) but if you are flushing it all (converter and so on) then 16 is not far out of range.
kena is offline  
Old 07-07-2009, 09:57 PM
  #4  
CMOC Rookie
Thread Starter
 
wannabesaleen281's Avatar
 
Join Date: Jan 2009
Location: airdrie
Posts: 193
Is it possible to just switch whats in the pan to synthetic or does the entire system need to be switched?
wannabesaleen281 is offline  
Old 07-07-2009, 10:06 PM
  #5  
CMOC Veteran
iTrader: (1)
 
kena's Avatar
 
Join Date: Mar 2008
Location: Canmore, Alberta
Posts: 365
No you have to flush it all out and start fresh. Pan drain after that. Your car is getting old so you may as well treat it to a fluid flush anyway regardless which fluid you use.
kena is offline  
Old 07-07-2009, 10:09 PM
  #6  
CMOC Rookie
Thread Starter
 
wannabesaleen281's Avatar
 
Join Date: Jan 2009
Location: airdrie
Posts: 193
Well thanks guys i appreciate all the help i feel like an idiot i bought 4L of royal atf it cost me 70 bucks now i need to return it because i cant afford to buy a crazy amout of litres to do the flush but i did replace my pan seal and put new tranny mount in with a full flush and filter and the tranny does feel alot better.Well guys thanks again.I just wanna get all my tune up out of the way for streetwheelers i am gonna beat on her all weekend.

Last edited by wannabesaleen281; 07-07-2009 at 10:09 PM. Reason: spelling
wannabesaleen281 is offline  
Old 07-07-2009, 10:15 PM
  #7  
CMOC Veteran
iTrader: (1)
 
kena's Avatar
 
Join Date: Mar 2008
Location: Canmore, Alberta
Posts: 365
Don't feel that way, that is what you were told but it was a misunderstanding. At least you flushed it with new fluid and it does not have to be synthetic. Good luck at what must be the hun footers. I want to go myself but there is a bit of a scheduling issue with my wifes birthday party. The Big 50.
kena is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rimacrae
Mustang Drivetrain
12
12-11-2011 09:37 PM
lazy_stang
5.0L
3
09-09-2008 01:52 PM
Bubba_Lane
General Mustang Tech & Chat
6
06-18-2007 12:35 PM
White_Snake
General Mustang Tech & Chat
6
02-23-2007 06:36 PM



Quick Reply: Switching from normal atf to synthetic atf quesions?



All times are GMT -5. The time now is 01:14 AM.