Weight Reduction
05-21-2009, 09:10 PM
#2
Wow this is gonna be a list and a half...
Start with Interior.....
- Remove your carpet and trash that called insulation...
- While carpet is removed, remove all the seam sealer...
- Swap your seats, from power to non-power or something after market...
- Bye, Bye spare tire and jack...
- Yep thats right.....decrease the size of your stereo or remove the entire thing....
- Only need wiper arms and blades when it rains, hell RAINX...
- Drag rims are nice weight drop...
- Chromoly tubular K member and A arms....
- Air bag(s) delete...
- A/C Delete...
- Loose weight your self.....LOL j/k
- Floor mats are only for looks... lol
- Swap from power mirrors, door looks, and windows to ALL Manual
- All your glass to plexiglass
- Remove your wing
- Do you need 4 bolts holding your shift in, when 2 work just fine.....Do you need 2" long bolts holding that in there when 3/4" Long bolts will do the same damn thing?
- Do I hear a aluminum drive shaft swap?
- Oh look more seam sealer in the trunk...
- Swap your complete wiring from stock to painless wiring...
I have more just need to think about it....this should get you started lol.
Start with Interior.....
- Remove your carpet and trash that called insulation...
- While carpet is removed, remove all the seam sealer...
- Swap your seats, from power to non-power or something after market...
- Bye, Bye spare tire and jack...
- Yep thats right.....decrease the size of your stereo or remove the entire thing....
- Only need wiper arms and blades when it rains, hell RAINX...
- Drag rims are nice weight drop...
- Chromoly tubular K member and A arms....
- Air bag(s) delete...
- A/C Delete...
- Loose weight your self.....LOL j/k
- Floor mats are only for looks... lol
- Swap from power mirrors, door looks, and windows to ALL Manual
- All your glass to plexiglass
- Remove your wing
- Do you need 4 bolts holding your shift in, when 2 work just fine.....Do you need 2" long bolts holding that in there when 3/4" Long bolts will do the same damn thing?
- Do I hear a aluminum drive shaft swap?
- Oh look more seam sealer in the trunk...
- Swap your complete wiring from stock to painless wiring...
I have more just need to think about it....this should get you started lol.
05-21-2009, 09:32 PM
#3
Administrator
Join Date: Jan 2005
Location: Ontario
Posts: 17,778
Don't forget the front sway bar delete
Battery in the trunk,not much of a weight reduction,but helps plant the rear tires,and takes the weight off the front
Lose your fog lights
Lose your tail pipes
Lose the rear seat
Front,and rear inner bumpers under the facias
You can always cut the side impact bars out of the doors
There is probably more.LOL!
Battery in the trunk,not much of a weight reduction,but helps plant the rear tires,and takes the weight off the front
Lose your fog lights
Lose your tail pipes
Lose the rear seat
Front,and rear inner bumpers under the facias
You can always cut the side impact bars out of the doors
There is probably more.LOL!
05-21-2009, 10:01 PM
#4
The basic ones and I forgot about them LOL!
Good call
I even done the front sway bar, fog lights as well!
Since I have the SN95 I did the Fox fiberglass bumper swap....
https://www.cmoc.ca/forums/t9548/
Good call
I even done the front sway bar, fog lights as well!Since I have the SN95 I did the Fox fiberglass bumper swap....
https://www.cmoc.ca/forums/t9548/
05-22-2009, 09:37 PM
#10
Administrator
Join Date: Jan 2005
Location: Ontario
Posts: 17,778
The basic ones and I forgot about them LOL!
Good call I even done the front sway bar, fog lights as well!
Since I have the SN95 I did the Fox fiberglass bumper swap....
https://www.cmoc.ca/forums/t9548/
Good call
I even done the front sway bar, fog lights as well!Since I have the SN95 I did the Fox fiberglass bumper swap....
https://www.cmoc.ca/forums/t9548/
Thread
Thread Starter
Forum
Replies
Last Post
