Whats involved with changing cams?
 

just wondering the process of what has to be done when changing cams.. does the motor have to come out?

Which engine?

2v gt's...

On a sliding skill level I would rate it at 3.5/5. 0 being air filter 5 being a DOHC converison...........

It wouldn't be a hard job,very easy to get to actually,but.......the skill level will be needed.But that is also depending on if it is just a cams swap,or cams and valve spring swap.
The best thing to do is save the bucks,find a set of '01 to '04 PI heads as they have the bolt on cam gears,plus the more comon cam cover bolt pattern ('99,and '00 have the pressed cam gear,and 13 bolt pattern cam cover for one side and 14 for the other side),and install the valve springs and cams,then swap the heads over,and all that would be left to do,is dial in the cams,and re install the front engine cover,and cam covers,and little stuff,ects......

i knew you would of had the answerrockon: ..lol...... but im just thinking on getting cams like the vt stage 1 that dont involve changing anything else but i also want to change the cam gears at the same time...

and since vt closed down i dont think theres another company that will have cams that just slide in with out anyother stuff needed....

LOL,and i have the answer to the cam issue aswell......rockon:
Here is the link to the guy behind the VT cams,the one who came up with the specs.....Jim Cushman,who use to work for VT.
http://www.cushmanmotorsports.com/
He started up his own thing,and the best thing is,he lives in Strathroy,here in Ontario.
Contact info....
Cushman Motorsports
375 Oak Ave
Strathroy,Ont
N7G 3A9
519-245-1164
And link to email him....
http://www.cushmanmotorsports.com/in...age=contact_us
thumb: