winter mods
 

so winter is half over give or take a few weeks.Who is doing what to there car this winter and how is it goming along?
Mine projedt is coming together nicely i can now get the hood to close which is a good thing because damm hoods aren't cheap and to dump close to a grand just to get a 1/4 clearance.

My project is going farely well. Alot of Work to do yet, and a ton of parts to buy but overall im happy with the progress.


A BIG thanks to Stang illusions, without him my car wouldn't be as far along as it is. I'd still probably be trying to decide if i should scrap the body or not so.

Thanks Keith thumb:

Well i recently brought the car to shop for the co-op kid to strip so it can go and be painted. Also picked up a new trans, the new ford racing boss block and rotating assembly will be heading to the machine shop in the next week. I hopefully be out this summer once again!

No problem Josh ;)

Im currently laying under my car (When not working on Josh's car) sanding the floor and getting it ready for Por-15 :)

Finally found a good deal on an IRS assembly for the Capri, so getting rid of the solid rear axle stuff now and going for IRS! Looks like I'll be selling my draglites and buying some larger, 5-lug rims though too :(

I MAY do a fuel system other than that... nothin, unless somthing breaks.

Already done most of mine.Got the Bullitt intake swap done,added in a auto meter ultra lite water temp gauge,and i still need to pick up a auto meter ultra lite oil pressure gauge,and volt gauge to install into my Speed of Sound dual pillar gauge pod.Then i think i will make up my mind on the Steeda underdrive pulleys,then in April......to get tuned.

You'll break trying to keep up with mefirejump:

(For more information, see Signature)

Somebody should line Josh up a race with the Purvis car ;)

http://www.ramclutches.com/cars/patrick%20500.jpg

Josh, it's all motor, you should be able to take it, LOL! ;)

Its one thing to have the parts. Its something completely different to know how to use them! 13's to 9's is a big jump. You'll be lucky if you don't your pants the first time down the track!

I've got my depends all ready to go.thumb:

You have more money in your drivetrain than I have in my whole car, I should hope it will be faster. LOL

LMAO, I think Jody is out of your league....I have to loose to Jody!

You go play with Dave and his yellow monster and we'll wee what happens to your small block ;)

LMAO....So easy to get the Petebourough guys going.!!!!

going to in stall just v-1 blower with all the toys !! full headers and electric
cut-outs pulse fix the interior

Just remember, it has to be TOGETHER to have enough!


Boxes of parts don't run very fast at the track.LOL


You have never built a race car before have you? You haven't even started the hard part of the build yet. Wait till you try to put all that high dollar JUNK together in one car and make it work.HAHAHAHAwall:

You are in for some fun been there done that 3 times starting #4.

Atleast you are blowing the whole load at once instead of trying to do it on a budget like all us other guys.LOL

Build it once. Build it RIGHT!


P.S It's a street car im building.

If I had your money I would have built it once.LOL I have a wife, house and kids that are WAY more important!

You keep telling yourself its a street car! You get it all done and we will go for a cruise down 401. I'll take my Drag car and I'll guarantee I won't be getting passed by old ladies in Minivans.HAHAHA


Honestly though this is all in fun. You will have an awesome car but it is what is. I am sure you will have lots of fun with the car.

LMAO..the entire Street car thing is an inside joke with Keith. LOL...It's a drag car that will see some Tim Hortons parking lots a few times.


P.S Watch out for those mini-vans, there fast

and Neon's.....................:(

only red and purple ones, and watch out.........they have spray this year!

HA HA HA HA .....were all gonna loose to NEONS......LMAO, i may as well quit right now if there are Neons out there that are gonna beat me.

There is also a white one looking for your truck this year so be ready! firejump:

ohhhhh! line em up, Your turn first! So keith, motor to motor, or run what you brung!

Eagle Eyes Performance Headlights (Christmas present)
APS Billet Grille (Christmas present)
Sequentail Tail Lights (Christmas present)
Locking Gas Cap (just ordered from Moss)
Exterior Gas Cover (just ordered from Moss)
Dash Kit (ordering from Moss in April)

In your current state, maybe you shouldn't reply, because some little old lady in a wheel chair could whip your ass. Because her "car" runs! I really don't think you could push your car down the track faster than a neon could drive down!

Ohhhh here we go LMAO firejump: firejump:

Run what you brung! lol
What are you going to bring to the track this year? still have your mustang or are you gonna bring the truck, or a Honda? lol

still have the mustang, But I thought you were picking on the s10 lol

Well, if I end up beside it I guess well see what happens ;)

So, I'm getting IRS!!!!!! I'm excited!!!!!!!! LOL!!!!!!!!!

And lets say I DID win perhaps....would you be more mad at the way my car looked or would you be twice as pissed if I put clear tail lights, Body kit, and a huge aluminum wing on the back?

OH and 19" white motegi wheels lol

this is completely random, care 2 elaborate?

Didn't you know my car is riced out? I was just wondering if I did beat you on the track, would you be more mad you got beat by a riced out mustang?

What do you think of my current mods?
http://www.goingfaster.com/spo/ghetto5.jpg

Look N' good eh DAWG

hahahhaahhhahahha, OMG thast hilarious!

Whats so funny? don't you like it?

I love the winter

3.4 Whipple, FR500 heads, FR500 cams, Bassani LT's, melling pump, scatter can, spec clutch, full length subframes, lethal per. fuel system.

N2O is waiting for now, next years addition!

More parts to get:

MAgna fuel Prostar 500 Fuel pump
Aerospace Front drag brakes. 4 piston calipers
Miezere 55gpm waterpump
Steeda Upper and lower Adj control arms
Fuel sump
Flamining river manual rack
Manual Master cyl