RHD Mazda Twin Turbo (FD)
08-26-2010, 08:11 PM
#1
CMOC Newbie
Thread Starter
Join Date: May 2006
Location: Cambridge
Posts: 16
RHD Mazda Twin Turbo (FD)
Here are some of the details of my car. All the work done to my car has either been done by Mazdees, or Rotary Dynamics. I think I am very hard on my car but here is how I brake it down.
Interior: Black-- 8/10
R1 suede seats in good condition, no rips or tears. Some small scratches here and there.
Exterior:Black--8/10
Great from a distance, but shows small blemishes when you look closely at the paint. For example the bumper has some stone chips.
Suspension is stock R1
Goodies.... Many of these modifications were done at once so they have 6,000km (not miles!) of usage on them. That includes the break in time!
Freshly rebuilt Street ported motor with 3mm seals only 6,000km on the rebuild.
BNR stage 3 turbo. The core was purchased off of (Rich)GoodfellaFD3S, and was modified by (Bryan) bnrsupercars.com 6,000km ago
I have installed a large SMIC intercooler, and duct.
1300 secondary injectors were purchased from japan2LA and they were freshly rebuilt by RC Engineering. I might still have the documentation on the injectors. 6,000km
hks twinpower - bought from another forum member
greddy profec b 2 - bought from another forum member
power fc, - Tuned by thewird
Racing Beat duel tip cat back. Brand new from the RX7 around 9,000km ago.
3 inch down pipe
high flow cat - 9,000km ago - I legally passed emissions!
fidanza light weight flywheel I think it was around 9lbs - 6,000km
Bully clutch stage 3 - 6,000 km ago
Supra twin turbo fuel pump 6,000km
fluidyne rad - bought from another forum member
AEM Water/Meth injection - only running water for safety - 9,000km
Forgestar rims, brand new, with rubber. Maybe 500-1000km on them. 18 inch, by 9.5 all the way around. They weigh only 19lbs!
I am looking for $13,000
Here is a picture when I had racing harts on it.[URL=http://img827.imageshack.us/i/rx7wracingharts.jpg/]
Uploaded with ImageShack.us[/IMG]
If you are interested in more information please contact me via email. double_j75@hotmail.com
Interior: Black-- 8/10
R1 suede seats in good condition, no rips or tears. Some small scratches here and there.
Exterior:Black--8/10
Great from a distance, but shows small blemishes when you look closely at the paint. For example the bumper has some stone chips.
Suspension is stock R1
Goodies.... Many of these modifications were done at once so they have 6,000km (not miles!) of usage on them. That includes the break in time!
Freshly rebuilt Street ported motor with 3mm seals only 6,000km on the rebuild.
BNR stage 3 turbo. The core was purchased off of (Rich)GoodfellaFD3S, and was modified by (Bryan) bnrsupercars.com 6,000km ago
I have installed a large SMIC intercooler, and duct.
1300 secondary injectors were purchased from japan2LA and they were freshly rebuilt by RC Engineering. I might still have the documentation on the injectors. 6,000km
hks twinpower - bought from another forum member
greddy profec b 2 - bought from another forum member
power fc, - Tuned by thewird
Racing Beat duel tip cat back. Brand new from the RX7 around 9,000km ago.
3 inch down pipe
high flow cat - 9,000km ago - I legally passed emissions!
fidanza light weight flywheel I think it was around 9lbs - 6,000km
Bully clutch stage 3 - 6,000 km ago
Supra twin turbo fuel pump 6,000km
fluidyne rad - bought from another forum member
AEM Water/Meth injection - only running water for safety - 9,000km
Forgestar rims, brand new, with rubber. Maybe 500-1000km on them. 18 inch, by 9.5 all the way around. They weigh only 19lbs!
I am looking for $13,000
Here is a picture when I had racing harts on it.[URL=http://img827.imageshack.us/i/rx7wracingharts.jpg/]
Uploaded with ImageShack.us[/IMG]If you are interested in more information please contact me via email. double_j75@hotmail.com
Last edited by Double_J; 08-26-2010 at 08:12 PM. Reason: forgot email address
Thread
Thread Starter
Forum
Replies
Last Post
