Canadian Mustang Owners Club - Ford Mustang Forums

Canadian Mustang Owners Club - Ford Mustang Forums (https://www.cmoc.ca/)
-   Mustang Parts for sale (https://www.cmoc.ca/mustang-parts-sale-71/)
-   -   Big-Time parts sale, cars, engines, parts, rims more... (https://www.cmoc.ca/mustang-parts-sale-71/big-time-parts-sale-cars-engines-parts-rims-more-8717/)

KILLDOZER 04-12-2008 09:21 PM

OK, just to update what I have and what I don't have anymore:

I'm selling my collection of mustang parts, too many cars/parts not enough time.

15 x 8 + 15 x 7 Weld draglights 4 bolt with BFG,s 275/50/15 on back 215/70/15 on front. - 750.00 Tires are gone, still have the rims - I'm not really interested in taking offers on these till I clean them up.

Less than 20K on 11:1 306 flat tappet, Holley 650 DP/DF all mechanical, Torker II, fully rebuilt 351W D00E/C9OE heads ss valves, double springs, hardened locks, guideplates, 1.6 TRW extruded aluminum roller fulcrum/tip rockers, ported by Tom Morana @ Afordable Performance, TRW forged pistons, big cam (specs unknown, but sounds very healthy) MSD mech adv dist. Engine comes with NOS Cheater kit adj-150-250 HP, square flange with 10 lb bottle. This would be a 500 hp combo Minimum on a 150 shot. Nice engine, nice sound! - 2500.00 complete

Complete 84GT interior, grey with halo seats, c/w a CD player/amp/sub box/ speakers + 3 mech guages and monster tach and I'll leave the Nitrous switch in there too. Interior hasn't seen an hour of sun since the mid 90's... great shape.
- 400.00 - Still have all , will part out.

1.625" long tube headers, 302/fox chassis, excellent shape. - 125.00 - Gone

2 Good T5's - 350.00 ea

Hayes HD PP+disk (28oz) clutch kit less than 20K - 150.00

1 - 8.8" fully rebuilt bearings/seals/clutches in LSD, new 410 gears, work done by Driveline. Quiet and tight, less than 20K on it. - 450.00 - Sale pending?

1 - 8.8" good LSD, 3.55 gears, a little loose on the lash, but still runs quiet. - 125.00

'87 5.0 HO converted to carb, torker II, E cam mileage unknown. - 200.00 - Gone

1 stock H pipe less than 10 K, was new from Ford in '04 - 125.00 - Gone

1 Mac Off road pipe, to be repaired "H" section, otherwise good. - 75.00

1 Flowmaster Cat-back 2 chambers 2.5" fox chassis LX, regular non-chrome pipes out back good shape. -150.00 - Gone

2 stock front sway bars - 45.00/ea

2 stock rear sway bars - 45.00/ea

2 stock double hump cross members - 75.00/ea

1 MSD 6AL - 125.00 - Gone

1 MSD 6T (has plug for rev limiter chip) - 125.00

1 MSD 5AL (IIRC, basic MSD box) - 100.00 - Edit: it's a straight 6A - no limiter

1 Accel Big yellow coil. - 25.00

2 stock T5/8.8 5.0 driveshafts - 35.00/ea

1 pair mac 1.625" unequal length shorties - 75.00 - Gone

1 complete '81 LX coupe silver on red, basic no option car. Has 306/C4/8.8. The engine was rebuilt in '97 .030" .010"/.010" and driven very little by deceased previous owner, and only 1 year by myself. engine has a dual plane alum intake, mild cam, dual exhaust, needs a distributor for flat tappet cam. C4 has ratchet shifter, manual valve body, shift kit, 2800 stall converter and works well. 8.8 has good LSD and 3.08 gears. Body is very good for the year, minimmal rust. interior is very good shape. This is a nice sub 3000lb 4 eye at a good price. C/W nice 10 holes on excellent BFG's - 1500.00 obo - Gone


I have more, but this will start me off, ask if you need something not on the list. All cars are 4 eye 1 coupe, one hatch. Have some '82GT bits in/on one.

Note: All these parts are still on the cars in my garage, I will need some time to pull them, and I'm not going to tear the cars apart without some decent interest.

Loacted in Trenton area.

Thanks.

All prices obo

82 GT 04-13-2008 08:01 AM

Coil
 
1 Accel Big yellow coil. - 25.00

Is this the one you have for sale ?

http://www.accel-ignition.com/Produc...minselection=0

Thanks

:tup

KILLDOZER 04-13-2008 08:40 PM


Originally Posted by 82 GT (Post 93640)
1 Accel Big yellow coil. - 25.00

Is this the one you have for sale ?

http://www.accel-ignition.com/Produc...minselection=0

Thanks

:tup

Nope, it's the BIG one :) :

http://i186.photobucket.com/albums/x...010097_001.jpg

beast 83 04-15-2008 07:02 PM

hey
 
:chacha: yes im am very interested in the rear end ive been lookin for 4.10 gears for awhile, also how much would it cost me to have the drive line, fix very much? but nyways im workin on a side job doing renovations and ill be done towards the end of the month so u have time to take the rear end off the car, also if it means anything ill pay 500$ if u drive it down. sound like a deal? but thanks again and i cant wait to get it thnx for spending the time to help me out...

KILLDOZER 04-16-2008 11:22 AM


Originally Posted by beast 83 (Post 93717)
:chacha: yes im am very interested in the rear end ive been lookin for 4.10 gears for awhile,

Very well, I'll pull it next week.


Originally Posted by beast 83 (Post 93717)
also how much would it cost me to have the drive line, fix very much?

Not sure what you're asking for here, the drive shaft? The entire driveline? I do have a lot of parts still, so let me know what you need, we can make a package deal maybe.



Originally Posted by beast 83 (Post 93717)
but nyways im workin on a side job doing renovations and ill be done towards the end of the month so u have time to take the rear end off the car, also if it means anything ill pay 500$ if u drive it down. sound like a deal?

I won't be driving down to London, sorry.


Originally Posted by beast 83 (Post 93717)
but thanks again and i cant wait to get it thnx for spending the time to help me out...

No problem, I am at your disposal - just as long as you show up with cash on the agreed date. :)

mattd 04-16-2008 07:42 PM

when your ready to sell those rims LMK , iam interested dirty or clean . What ever works

Thanks Matt

KILLDOZER 04-16-2008 08:13 PM


Originally Posted by mattd (Post 93750)
when your ready to sell those rims LMK , iam interested dirty or clean . What ever works

Thanks Matt

I will try to get the rims off and cleaned up, you and two other guys are interested in them, I will post pics here in the next couple weeks, keep an eye on this thread.

Thanks

95srt 04-22-2008 04:58 PM

any neon parts? :gayfight:

KILLDOZER 04-23-2008 11:06 AM


Originally Posted by 95srt (Post 93900)
any neon parts? :gayfight:

I've a nice HE351CW - but I'm keeping that :). How about a NOS Cheeter kit, adj 100-200 hp? It would help with spool up...

95srt 04-23-2008 01:42 PM

Well today I had to do some work on a 4.6l Mustang and DAM, I miss that sound. I Should sell Neon and buy 99+ :chacha:


All times are GMT -5. The time now is 08:13 PM.


© 2024 MH Sub I, LLC dba Internet Brands