Big-Time parts sale, cars, engines, parts, rims more...
 

I'm selling my collection of mustang parts, too many cars/parts not enough time.

15 x 8 + 15 x 7 Weld draglights 4 bolt with BFG,s 275/50/15 on back 215/70/15 on front. - 750.00

Less than 20K on 11:1 306 flat tappet, Holley 650 DP/DF all mechanical, Torker II, fully rebuilt 351W D00E/C9OE heads ss valves, double springs, hardened locks, guideplates, 1.6 TRW extruded aluminum roller fulcrum/tip rockers, ported by Tom Morana @ Afordable Performance, TRW forged pistons, big cam (specs unknown, but sounds very healthy) MSD mech adv dist. Engine comes with NOS Cheater kit adj-150-250 HP, square flange with 10 lb bottle. This would be a 500 hp combo Minimum on a 150 shot. Nice engine, nice sound! - 2500.00 complete

Complete 84GT interior, grey with halo seats, c/w a CD player/amp/sub box/ speakers + 3 mech guages and monster tach and I'll leave the Nitrous switch in there too. :) Interior hasn't seen an hour of sun since the mid 90's... great shape.
- 400.00

1.625" long tube headers, 302/fox chassis, excellent shape. - 125.00

2 Good T5's - 350.00 ea

Hayes HD PP+disk (28oz) clutch kit less than 20K - 150.00

1 - 8.8" fully rebuilt bearings/seals/clutches in LSD, new 410 gears, work done by Driveline. Quiet and tight, less than 20K on it. - 450.00

1 - 8.8" good LSD, 3.55 gears, a little loose on the lash, but still runs quiet. - 125.00

'87 5.0 HO converted to carb, torker II, E cam mileage unknown. - 200.00

1 stock H pipe less than 10 K, was new from Ford in '04 - 125.00

1 Mac Off road pipe, to be repaired "H" section, otherwise good. - 75.00

1 Flowmaster Cat-back 2 chambers 2.5" fox chassis LX, regular non-chrome pipes out back good shape. -150.00

2 stock front sway bars - 45.00/ea

2 stock rear sway bars - 45.00/ea

2 stock double hump cross members - 75.00/ea

1 MSD 6AL - 125.00

1 MSD 6T (has plug for rev limiter chip) - 125.00

1 MSD 5AL (IIRC, basic MSD box) - 100.00

1 Accel Big yellow coil. - 25.00

2 stock T5/8.8 5.0 driveshafts - 35.00/ea

1 pair mac 1.625" unequal length shorties - 75.00

1 complete '81 LX coupe silver on red, basic no option car. Has 306/C4/8.8. The engine was rebuilt in '97 .030" .010"/.010" and driven very little by deceased previous owner, and only 1 year by myself. engine has a dual plane alum intake, mild cam, dual exhaust, needs a distributor for flat tappet cam. C4 has ratchet shifter, manual valve body, shift kit, 2800 stall converter and works well. 8.8 has good LSD and 3.08 gears. Body is very good for the year, minimmal rust. interior is very good shape. This is a nice sub 3000lb 4 eye at a good price. C/W nice 10 holes on excellent BFG's - 1500.00 obo


I have more, but this will start me off, ask if you need something not on the list. All cars are 4 eye 1 coupe, one hatch. Have some '82GT bits in/on one.

Note: All these parts are still on the cars in my garage, I will need some time to pull them, and I'm not going to tear the cars apart without some decent interest.

Loacted in Trenton area.

Thanks.

Shorties sold.

Wow Will you shure do have a collection eh.

Were abouts you located at maybe a couple of us from the board in the Trenton area can have a look at the collection I think I no a guy that might be interested in a drive shaft.

I also am interested in the Ford ribbed alum valve covers if your parting out. Would like to see the shape there in.

MSD 6AL - sold
Accel coil - sold
'84 GT tails sold
Dibs given on rear 275/50/15 BFG's if I part 'em

Yeah, 3 cars and 7 years worth. Most of the stuff is still on the cars, and some will remain that way untill I cease waiting for interest on the engine - I want it to run for any interested parties.

I'm going to flog this stuff for a week or two, and then dismantle 2 of the cars, clean the stuff up, blast and paint the exhaust parts and ship what's sold. The balance of pulled / cleaned up parts will be available for viewing no sooner than then, it's all buried in my drive shed right now.

Keith, you seem to know all the local 'Stang guys/gals, send them my way!! :)

Will do Will!

I know a few people in the area ;) Ill be sure to advertise.

Im in your area, interested in the 81 LX, does it need anything to be safetied and road worthy?

any pics of the longtubes?

It'll need a new power rack if you want power assist. I yanked the pump when the rack started leaking and couldn't find a manual rack at a decent price. It wasn't much different than the OEM manual rack in my '82. You will need a distributor as well. the car sould safety other than that. There is a guy with dibs on it right now, he's going to take a look next week. I can put you in line if you like. It does need a little bodywork being 26 years old, but not too bad at all taking that into consideration.

Not yet, they'restill in the car, I will have a digital camera by the weekend, I can take a few of them still on the car ('84GT) but I won't be yanking them till I give up on someone wanting the engine as I want to have the engine run for interested parties.

They are in solid shape, with a little surface rust. With a blast and a coat of high temp, they would look brand spankin' new :).

do ya have any pics of the 81 Coupe?? or maybe after ya get the camera??

Yep, I got the camera now. I'll be busy this week end, but I'll try to get all the pics done by sunday.

Hi, I need a 79-86 style dashpad in real nice shape, prefer black, but any color will do, have one?

my email is

im_schlodes@yahoo.com

Thanks

1 - 8.8" good LSD, 3.55 gears, a little loose on the lash, but still runs quiet. - 125.00

^^^^^
Is this a complete 8.8 rear?? If so I will likely take it.

^

I've got two one grey one black both in so-so shape. The best one is the black one, the bad being the center speaker grill is loosing chunks of vinyl, hard to avoid in a 25 y/o car. I could get some pics if you like. 20.00

The rear is complete drum to drum, I can even give you the quad shocks if you want them. Let me know if you are interested, The rear was pulled this aft, and it's ready to go.

Sorry about the delay in replying :).

Where are you located. I am interested in the stock H pipe need it for etest, is it in good shape?

I'm looking for front seats for an '89 Mustang. Do you have anything that is in good condition and would fit?
Thx

I'm in the Trenton Area, The pipe is in excellent shape, less than 5K on it, was brand new 3-4 years ago.

I have a stock set of OEM 84GT Halo/Lumbar seats. Dark Charoal in excellent shape.

http://www.mustangmods.com/data/7001/84gt2.jpg

Misc pic I have access to right now, I can get better ones.

Shoot me an offer if interested.

Misc pic of H pipe:

http://i186.photobucket.com/albums/x...S/P1010104.jpg

You are in Kingston? I have a guy coming from Kingston on Monday to pick up an engine. You two could split the gas money, he is bringing a half ton, I can hook you two up if you would like the H pipe...

Thanks but I have to work Monday, I was thinking this Sat or next weekend...
What year did the H pipe come off?
PM me with details on what day works for you and directions...
Thanks

Mustang parts
 

I,m looking for a good condition hatch , alot of the other parts you,ve lited are of interest .If you you have a good condition hatch please e-mail me or call and leave a message .thank-you Wade 705 878 4119 kira7@sympatico.ca

I am interested in a few things, I only have $50 think I could make payments? thumb:

No good hatches here...

I have a nice set of rusty lugnuts with stripped threads I'm looking to unload :).

^LMAO.....sold!

Interested in the '81, put me in line please.rockon:

LMAO ^^^^^^^

The '81 was sold last summer to a board member here. I still do have a couple T5's, couple 8.8's the 306, NOS Cheater kit, and an almost complete '84GT that I'm parting out. (and the stripped lugs too...)

I get lazy when It's cold outside!

Oh, and I also now have a mint Jeep Grand Cherokee 5.9 Ltd that will be going on the block. 1 year only AWD SUV, with 5.9 - fastest SUV in the world in '98 (high 14's low 15';s stock.) Loaded to the max, it's a luxury suite on wheels.

PM me if interested.

http://img301.imageshack.us/img301/1568/dscn0363vd8.jpg

http://img141.imageshack.us/img141/9409/dscn0364zs3.jpg

What are the gears in the 8.8's?

How rusty? I do not need a whole set just four. Does not matter how striped they are I plan on welding them to wheel studs anyway.............lmk..thumb:

3.55'S in one, 4:10's in the other.

What luck! I also have a case of soggy 7014 rod for sale. Package deal? :)

How soggy?

Not too bad, some of the rods even still have a little flux on them...

I do have a bag full of the flux that did fall off, I'll give it free to the buyer of the rods :).

I,m looking for a good condition hatch if you,ve got one i would be interested in making a package deal for a few of the other items you,ve listed for sale , if your interested please reply by e-mail , thank you Wade

are the rims still for sale and any pics

84 interior
 

What do you have left of this? Any pics available and where is your location/

Thanks

I have the entire drivetrain from the 84 = the N20 kit. Plus the entire car less the front clip. No exhaust or ignition.

I also have the trans/driveshaft/8.8 from the '82 (but it is '87 stuff).

I have quite a pile of parts yet, let me know what you need.