Its finally here
 

Well guys my new toy finally came today. Its a Garrett T04B Turbocharger for my blow-thru turbo set-up. rockon: What do you guys think? thumb:

http://i37.photobucket.com/albums/e5...ang/Turbo5.jpg
http://i37.photobucket.com/albums/e5...ang/Turbo4.jpg
http://i37.photobucket.com/albums/e5...ang/Turbo3.jpg
http://i37.photobucket.com/albums/e5...ang/Turbo1.jpg

i don't know a turbo looks much nicer on a car rather then in a cardboard box but to each there own. lol looks good now get it on the car

Looks good.
now get er done!

Thanks for the comments. I know I need to get her on the car, theres just so much welding going on right now. My cross over pipe and my headers are at my welders getting the final welds done. I need to get the flange for the turbo and finish the IC piping, external wastegate, and downpipe. :eek:

I'm going to post the whole build so far as soon as I have all my parts back, so stay tuned. thumb:

If this is going in a street car maybe you should of went with a blower but for each their own, hope it all works out good.

Giddie-upthumb:

This is going into my drag only car rockon:

Well got another UPS delivery today. 50mm External Racegate rockon:

http://i37.photobucket.com/albums/e5...1Image0022.jpg
http://i37.photobucket.com/albums/e5...1Image0021.jpg
http://i37.photobucket.com/albums/e5...1Image0020.jpg

Now just waiting on the Boost controller and BOV. firejump:

When do you figure it will be ready?

I'm hoping to have it done for June. I have to get a few more fuel components and some other odds and ends. :tup

I think its going to need alot of tuning, so I have to find a tuner that can set it on a chassis dyno. :rockwoot:

dyno
 

if you need some one to tune it and dyno it, i know some one that might be able to help you, check out www.u2ndyno.com

Thanks but looking for someone more local thumb:

Good stuff!
What is a racegate?

Its an external wastegate. This one is called a Racegate cuz it can support up to 1000 hp. Not that I'll need that much but I got a great deal on it rockon:

wpr in windsor is a good place for tuning

It holds the pretty horseys in their positioning stables before the race. thumb:

I was told he cant do turbo cars yet

He's offered to do mine, so I'd have to assume he can now.

Joel in Windsor CAN do your turbo car.

T04B... so what trim is that compressor wheel, looks like an "S" and the exact same one I got in my hybrid for my SVO.

Did you get a compressor map with it?

That would be cool if Joel can do it. rockon:

The turbo is a S-trim, and I later found out it has a T-3 hotside so I'm thinking its a T3/T4 hybrid.

So I have been looking for a Turbocoupe for a while, so if I end up finding one I might stick it in there and buy a Master Power T-70 for the race car.

I'll see what happens. thumb:

Well, that compressor is capable of about 37 lbs/min and on a stock intake/heads/cam 302 cube motor will run out of steam around 12-13 psi.

You couldn't spool that thing up on a 2.3L because the turbine wheel and housing were designed with 302 cubes in mind [two 2.3s basically].

Should be a nice quick spool turbo thumb:

I was thinking of using my old 75hp Zex nitrous kit to try and help with the spooling. Dont know yet. I have to find a car first.

Can't wait to see her done.rockon: