351w pollution / emission parts
for a carb'd 351w in my 93, i need any pollution parts to be compliant with drive clean red tape BS. i don't know exactly what i need, hopefully not much. i don't have anything right now, so if anyone knows what i need to get by, that would help. thanks
|
Have you checked out Taff's auto wreakes in Brighton,, think you could find everything you need for that,, need more info let me know can also check my Mictchel's manual and see what was on the motor originally..could take a run out there on a saturday, Albert, Colborne Ontario
|
If you are running a older 351 you will have to bring it up to 93 specs, as they go by what ever is newer...motor or year of car...I have the same problem...70s 351 in a 86......Did they put your plates? Good luck.
|
Originally Posted by 86gtmustang
(Post 149861)
If you are running a older 351 you will have to bring it up to 93 specs, as they go by what ever is newer...motor or year of car...I have the same problem...70s 351 in a 86......Did they put your plates? Good luck.
|
the people in the drive clean really dont have the knowledge or the time to be hunting for the date code of the engine block when they do an e-test. The stupid part is as well that a 351, in a 2500lb car has to have lower emission, than the same engine in an F350 at 4500lbs.. as the emissions allowed also go by weight of the car..
|
Originally Posted by firstday65
(Post 149883)
the people in the drive clean really dont have the knowledge or the time to be hunting for the date code of the engine block when they do an e-test. The stupid part is as well that a 351, in a 2500lb car has to have lower emission, than the same engine in an F350 at 4500lbs.. as the emissions allowed also go by weight of the car..
|
yes i so hear you there,, my Gm i have the EGR bypassed right now, till i have to do an e-test again,, the damm thing keeps melting the plastic intakes, and flooding the motor with coolent then it takes out the bottom end bearing from the engine being full of coolent, or it bends the rods from hydro locking..with no warning.. i'am now on my third motor in 3 years..
how bad is your car failing right now? |
i haven't had it tested yet.i bought the car last fall, took it in and the guy didn't want to test it. he said it needed emissions parts on it. at the time i didn't know what the difference was, but after reading and posting on the site, i should have taken it elsewhere. should at least get a baseline reading. i've heard that you can get roadside tested, or checked for pollution parts by police? fines, towing$, etc.
|
Originally Posted by firstday65
(Post 149820)
Have you checked out Taff's auto wreakes in Brighton,, think you could find everything you need for that,, need more info let me know can also check my Mictchel's manual and see what was on the motor originally..could take a run out there on a saturday, Albert, Colborne Ontario
|
have not been in a couple of weeks, was going to go there this morning to taffs
|
All times are GMT -5. The time now is 06:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands