1988 Ford MUSTANG GT - $10,000
02-18-2011, 04:09 PM
#1
CMOC Newbie
Thread Starter
Join Date: Jun 2006
Location: stoney creek
Posts: 9
1988 Ford MUSTANG GT - $10,000
Category: Domestic
Status: Clean Title
I have a 1988 Ford MUSTANG GT for sale, in Other - Ontario.
Mileage: 166km
Engine Size: 5.0
Asking price is $10,000
was going to post the car up in the spring but i decided to put it out there a bit early, need the cash for my new project...
88 gt, 166 orig.k, black on gray, no power options, no rust anywhere, mods include:
-extrude honed upper and lower true cobra intake with 5/8 spacer
-65mm motorsport throttle body
-24lb motorsport injectors
-C&L 73mm mass air meter
-bbk C.A.I
-b-cam
-mac underdrive pullies
-Trick flow twisted wedge heads
- comp cams scorpian r.r 1.7s
-motorsport lifters
-bbk 190lph fuel pump with adjustable kirban fuel regulator
- moroso solid mounts
-energy suspension poly tranny mount
-motorsport waterpump
-motorsport wires
-mac shorties
-mac h-pipe
-flowmaster cat back
-pro 5.0 shifter
-king cobra clutch assembly
-autometer gauges and 5" tach with light
-weld draglights, 3.5 up front and 8s in the rear with e.t streets
-lakewood driveshaft loop
-interior is 9/10
-new shocks, struts, goldline lowering springs
there is more that im forgeting right now, havent lifted the cover off it in awhile.
majority of these parts are only 1 summer old, car ran 12.7 at 106mph in september just before i put it away, and thats with 3.08s in the rear
im asking 10gs for it or i can strip parts off for my new project and replace with stock parts, car doesnt come with cobra rs
[IMG]http://i99.photobucket.com/albums/l316
/tplesspny/DSCI0418.jpg[/IMG]
Status: Clean Title
I have a 1988 Ford MUSTANG GT for sale, in Other - Ontario.
Mileage: 166km
Engine Size: 5.0
Asking price is $10,000
was going to post the car up in the spring but i decided to put it out there a bit early, need the cash for my new project...
88 gt, 166 orig.k, black on gray, no power options, no rust anywhere, mods include:
-extrude honed upper and lower true cobra intake with 5/8 spacer
-65mm motorsport throttle body
-24lb motorsport injectors
-C&L 73mm mass air meter
-bbk C.A.I
-b-cam
-mac underdrive pullies
-Trick flow twisted wedge heads
- comp cams scorpian r.r 1.7s
-motorsport lifters
-bbk 190lph fuel pump with adjustable kirban fuel regulator
- moroso solid mounts
-energy suspension poly tranny mount
-motorsport waterpump
-motorsport wires
-mac shorties
-mac h-pipe
-flowmaster cat back
-pro 5.0 shifter
-king cobra clutch assembly
-autometer gauges and 5" tach with light
-weld draglights, 3.5 up front and 8s in the rear with e.t streets
-lakewood driveshaft loop
-interior is 9/10
-new shocks, struts, goldline lowering springs
there is more that im forgeting right now, havent lifted the cover off it in awhile.
majority of these parts are only 1 summer old, car ran 12.7 at 106mph in september just before i put it away, and thats with 3.08s in the rear
im asking 10gs for it or i can strip parts off for my new project and replace with stock parts, car doesnt come with cobra rs
[IMG]http://i99.photobucket.com/albums/l316
/tplesspny/DSCI0418.jpg[/IMG]
Last edited by tplesspny; 02-18-2011 at 07:26 PM.
02-18-2011, 05:43 PM
#2
I am the post KING
Join Date: Feb 2005
Location: Calgary
Posts: 15,244
das purdy good luck
02-18-2011, 05:54 PM
#3
CMOC Addict
Join Date: Dec 2008
Location: Calgary
Posts: 518
bump for a nice car
02-23-2011, 08:21 PM
#4
CMOC Newbie
Thread Starter
Join Date: Jun 2006
Location: stoney creek
Posts: 9
bump it up....turn key street car
03-03-2011, 08:15 PM
#5
CMOC Newbie
Thread Starter
Join Date: Jun 2006
Location: stoney creek
Posts: 9
to the top, any offers...
03-25-2011, 04:42 PM
#6
CMOC Newbie
Thread Starter
Join Date: Jun 2006
Location: stoney creek
Posts: 9
bump it up, very clean rust free car, otherwise will be pulling motor and its going back to stock
03-25-2011, 05:11 PM
#7
I am the post KING
Join Date: Feb 2005
Location: Calgary
Posts: 15,244
A new member is looking maybe you guys can connect
04-18-2011, 01:07 PM
#8
CMOC Newbie
Thread Starter
Join Date: Jun 2006
Location: stoney creek
Posts: 9
Car is back to a stock 140k motor, very clean and detailed, 1.7rr, fms equal length headers, poly mounts, and turbine wheels, new price $8000 obo
04-25-2011, 08:41 AM
#9
CMOC Newbie
Thread Starter
Join Date: Jun 2006
Location: stoney creek
Posts: 9
bump.....
05-03-2011, 11:06 AM
#10
CMOC Newbie
Thread Starter
Join Date: Jun 2006
Location: stoney creek
Posts: 9
Bump.........
