Huge Garage Clean Out Sale
02-11-2006, 08:33 PM
#1
Huge Garage Clean Out Sale
Huge Garage Clean Out Sale
--------------------------------------------------------------------------------
Cleaning out my garage must sell this stuff. Need money for new 408w combo. Open to reasonable offers. Heres the list of stuff:
1. 87 8.8 rear end 410 gears rebuilt posi 28 spline with south side lowers and stock uppers. Sand blasted and painted. $400
2. C4 trans b&m internals stage 3 shift kit, 3000rpm stall convertor. Complete works great. Also have a shifter if needed. $500
3. 351w short block rebuilt keith black flat tops, nitrited crank,arp main studs,rod bolts, hardened oil pump drive, new oil pump,fox oil pan. Approx. 500kms mint. $2000
4. GT40P heads, stainless undercut valves, upgraded springs and retainers (good to .550 lift). Opened up exhaust ports (ported). These are in perfect shape. Still at the machine shop after being checked over. Approx. 8000kms on them. $800
5. 9 inch rear end 410 gears out of an early 66-77 bronco will get measurment $250
6. 351w eagle SIR rods bushed pin stock length new in the box $200
7. TRW aluminum roller rockers 7/16 stud 1.6 intake 1.7 exhaust $175
8. Demon carb 650 mechanical secondary RACE demon over $700 U.S new $400
9. UPR control arms Chromoly steel solid non adjustable lowers, adjustable uppers with solid housing bushings, powder coated silver. $400
10. 351w performer RPM carb intake used looks like new $200
11. 302 pro products rpm air gap carb intake used looks like new $150
12. 87-93 mustang GT tail lights black $120 pair
13. cobra 1.7 pedestal mnt rockers mint $ 150
14. 302 arp rod bolts new in package $40
15. 87-93 mustang coupe quarter glass in very good condition $120 pair
16. mustang LX cat back exhaust 2 1/2 Mac flow tubes ,walker dynomax tail pipes (not Stainless) fully welded mufflers unsure of brand but they sound great in excellent cond. $220
17. Nitrous mastermind progressive controller used $120
18. 87 mustang GT skirts and bumpers black never been painted (no peeling) $350
19. 87-93 mustang GT wing for hatch. No light $50
20. Mac windage tray for 351w no hardware $50
21. Lakewood blow proof bellhousing for toploader 4spd on small ford can use with T5 if you make a spacer (has a spot for the cable) $225
22. 83 Capri hood good shape $125
23. Ford truck aluminum wheels 15x10 5on5.5 bolt pattern directional style great shape $250
24. 66 289 heads could use rebuild $ 125
25. 351 clevland intake stock cast iron for 4v heads # D0AE-9425-L $100
26. Small block chevy short water pump with Alt. and P.S. brackets and pulleys to install as complete system. $125
I think that is it for now I will look and see what else I can dig up. Like I said before open to reasonable offers. Will consider shipping parts or bringing stuff closer to T.O. Located in Colborne about 1hr east of Toronto
--------------------------------------------------------------------------------
Cleaning out my garage must sell this stuff. Need money for new 408w combo. Open to reasonable offers. Heres the list of stuff:
1. 87 8.8 rear end 410 gears rebuilt posi 28 spline with south side lowers and stock uppers. Sand blasted and painted. $400
2. C4 trans b&m internals stage 3 shift kit, 3000rpm stall convertor. Complete works great. Also have a shifter if needed. $500
3. 351w short block rebuilt keith black flat tops, nitrited crank,arp main studs,rod bolts, hardened oil pump drive, new oil pump,fox oil pan. Approx. 500kms mint. $2000
4. GT40P heads, stainless undercut valves, upgraded springs and retainers (good to .550 lift). Opened up exhaust ports (ported). These are in perfect shape. Still at the machine shop after being checked over. Approx. 8000kms on them. $800
5. 9 inch rear end 410 gears out of an early 66-77 bronco will get measurment $250
6. 351w eagle SIR rods bushed pin stock length new in the box $200
7. TRW aluminum roller rockers 7/16 stud 1.6 intake 1.7 exhaust $175
8. Demon carb 650 mechanical secondary RACE demon over $700 U.S new $400
9. UPR control arms Chromoly steel solid non adjustable lowers, adjustable uppers with solid housing bushings, powder coated silver. $400
10. 351w performer RPM carb intake used looks like new $200
11. 302 pro products rpm air gap carb intake used looks like new $150
12. 87-93 mustang GT tail lights black $120 pair
13. cobra 1.7 pedestal mnt rockers mint $ 150
14. 302 arp rod bolts new in package $40
15. 87-93 mustang coupe quarter glass in very good condition $120 pair
16. mustang LX cat back exhaust 2 1/2 Mac flow tubes ,walker dynomax tail pipes (not Stainless) fully welded mufflers unsure of brand but they sound great in excellent cond. $220
17. Nitrous mastermind progressive controller used $120
18. 87 mustang GT skirts and bumpers black never been painted (no peeling) $350
19. 87-93 mustang GT wing for hatch. No light $50
20. Mac windage tray for 351w no hardware $50
21. Lakewood blow proof bellhousing for toploader 4spd on small ford can use with T5 if you make a spacer (has a spot for the cable) $225
22. 83 Capri hood good shape $125
23. Ford truck aluminum wheels 15x10 5on5.5 bolt pattern directional style great shape $250
24. 66 289 heads could use rebuild $ 125
25. 351 clevland intake stock cast iron for 4v heads # D0AE-9425-L $100
26. Small block chevy short water pump with Alt. and P.S. brackets and pulleys to install as complete system. $125
I think that is it for now I will look and see what else I can dig up. Like I said before open to reasonable offers. Will consider shipping parts or bringing stuff closer to T.O. Located in Colborne about 1hr east of Toronto
02-13-2006, 03:24 PM
#2
CMOC Elite
Join Date: Oct 2005
Location: blackfalds, ab
Posts: 1,589
im interested in a few things . i sent you a pm 
02-14-2006, 01:17 AM
#3
CMOC Newbie
Join Date: Sep 2005
Posts: 9
are the gt40 heads still for sale and were are u located
02-14-2006, 05:17 PM
#5
CMOC Rookie
Join Date: Oct 2004
Posts: 60
Are those heads (the GT40P) the ones that need special headders?
02-15-2006, 05:57 PM
#6
CMOC Newbie
Join Date: Feb 2006
Posts: 7
hey whats up
newbie here
but very interested in the 351 intake
also iterested in the 410
where are you located
im in windsor
newbie here
but very interested in the 351 intake
also iterested in the 410
where are you located
im in windsor
02-16-2006, 11:41 AM
#7
Yes heads have a different spark plug angle,will work with most long tubes for standard heads.
I am located in Colborne about 1hr east of Toronto. I am a long way from Windsor. I have familly there and it is about a 6hr drive.
I am located in Colborne about 1hr east of Toronto. I am a long way from Windsor. I have familly there and it is about a 6hr drive.
02-16-2006, 10:22 PM
#8
CMOC Newbie
Join Date: Feb 2006
Posts: 4
intake
I'm interested in the intake '302 pro products rpm air gap carb intake used looks like new $150' can you send me a pic or two?
02-16-2006, 11:39 PM
#9
CMOC Newbie
Join Date: Feb 2006
Posts: 7
hey whats up
could you send me the pics of the 351 intake
thanks jake
could you send me the pics of the 351 intake
thanks jake
