race stuff gotta go
03-25-2006, 02:16 PM
#1
CMOC Rookie
Thread Starter
Join Date: Nov 2004
Posts: 75
race stuff gotta go
NEW IN BOX.. VORTEC Z TRIM BLOWER..
ill give 3 extra belt cost of 120 ea.
all also include every pully availible for this unit , witch was not included from vortec, 4500.00 brackets are for 302/351 sbf mustang set up
this unit can be driven on the street with 10 psi at the lowest , but it was built for 30 + psi for an all out race unit..replacement cost withoput the extra's 6,000.. will except any major credit card.. call vortec for info.. and qoute the serial # i have they will inform you of its capability's .. was origanal ordered for a tag racecraft customer who did not finish his project... need it gone asap...
(2) moser extream 9inch axels .. these axel were used for a short period.. they are drilled for small ford 5x4.5 bolt , with 3.8 studs.. i have the exact lenghs at my office, if needed , i do know they fit nicely in a 1999 or newer mustang body width with a full tub using a 15x14 wheel with a 7inch backspacing .. bearing are included , origanal purchase price was 1048.34 .. i will let them go for 350.00
not negotiable... a good buy even for a car guy who may build in the future...
oh yes these are 40 spline axel.. some say over kill, but center sections are not much more then a 31 spline , so big is better and im sure you will not break these..
msd 7al2 with external adj. dials for 2step., trans b. and more.. not sure how old it is but it has a sticker on it from msd , for servising in 2004.. it works good i used it last year.. ill take 300 for it or 350 with all the dials...
TFS R series heads : these heads are seriously ported and oringed.. to my knoladge the proting cost was well over 2000.00 at beatty&woods race engines .. there is alot of custom work completed on these heads, they come with 2.10 & 1.67 vaulves... they are currently at a machien shop being reassembled and completly freshend up.. cost to do this was 650.00 .. all the best stuff... i was asking 1500 for these unfinished , i will now take 1500 for them completed they will be ready in a week .. they went a best of 8.01 @ 186 in a 2800lbs mustang with a 351 stroked turbo motor...
call mike -709 685-6453...
ill give 3 extra belt cost of 120 ea.
all also include every pully availible for this unit , witch was not included from vortec, 4500.00 brackets are for 302/351 sbf mustang set up
this unit can be driven on the street with 10 psi at the lowest , but it was built for 30 + psi for an all out race unit..replacement cost withoput the extra's 6,000.. will except any major credit card.. call vortec for info.. and qoute the serial # i have they will inform you of its capability's .. was origanal ordered for a tag racecraft customer who did not finish his project... need it gone asap...
(2) moser extream 9inch axels .. these axel were used for a short period.. they are drilled for small ford 5x4.5 bolt , with 3.8 studs.. i have the exact lenghs at my office, if needed , i do know they fit nicely in a 1999 or newer mustang body width with a full tub using a 15x14 wheel with a 7inch backspacing .. bearing are included , origanal purchase price was 1048.34 .. i will let them go for 350.00
not negotiable... a good buy even for a car guy who may build in the future...
oh yes these are 40 spline axel.. some say over kill, but center sections are not much more then a 31 spline , so big is better and im sure you will not break these..
msd 7al2 with external adj. dials for 2step., trans b. and more.. not sure how old it is but it has a sticker on it from msd , for servising in 2004.. it works good i used it last year.. ill take 300 for it or 350 with all the dials...
TFS R series heads : these heads are seriously ported and oringed.. to my knoladge the proting cost was well over 2000.00 at beatty&woods race engines .. there is alot of custom work completed on these heads, they come with 2.10 & 1.67 vaulves... they are currently at a machien shop being reassembled and completly freshend up.. cost to do this was 650.00 .. all the best stuff... i was asking 1500 for these unfinished , i will now take 1500 for them completed they will be ready in a week .. they went a best of 8.01 @ 186 in a 2800lbs mustang with a 351 stroked turbo motor...
call mike -709 685-6453...
Thread
Thread Starter
Forum
Replies
Last Post
