I'll keep you posted,thanks.

 

Getting the 3 left brake turn signal lights is not as easy as putting a jumper wire in. I tried this and when wired that way, both the inside bulbs from left and right light up. There must be a shared feedback line . The unlit bulb has 4 wires (2 are black), the middle bulb has 4 wires (one is black) the outside bulb has 4 wires, 2 are black).
I don't know what happens when the "unlit" bulb is cut away from the wire harness and ground and positive is jumped to it but it may mess up the existing lighting. Anyone ever try this?

 

there is no need to do that.. all you need is a pin (the inside only has two where as the outter two have three). insert the pin into slot labled "major" with a rumper wire properly connected to the next bulb lead labeled the same thing. i know this works cause my tinted stock lights worked fine, and my cobra tails too...

 

I wonder if this also works on the 96-98 tails as well....?
My car is a 94 but I put the 96-98 tails in with the matching harness and the only thing that changed was my blinker....it blinks really fast.
But same thing only the outers light up or what ever....

 

my best guess is it should same setup really just different lenses

 

Thank you "Crafty". I will try it this week.