Show a Motor Monday!
1 Attachment(s)
How about showing off what motorvates you? It can be what you have in your car, Truck, Boat etc. Past or present. More gooder so if it a Ford product of course! It can even be a nice setup that you have seen in person or on the net. Show us what you like!
Here's what was in my 87 Fox Coupe. It went through a few different combos but this was when it was all new and going in. https://www.cmoc.ca/attachment.php?a...ine=1414397487 Lets see yours! |
Day-um that looks purty. Good idea.
|
2 Attachment(s)
My '07 V6 with a blower kit from Explorer Express...
|
2 Attachment(s)
Just a bone stock 3V 4.6L but she's clean.
https://www.cmoc.ca/attachment.php?a...ine=1414416990 https://www.cmoc.ca/attachment.php?a...ine=1414416990 |
I'll have to get some pics! Mine looks the same as Herbs, just not quite as clean!
|
2 Attachment(s)
Here's older picture of mine, I removed and sold the Intake Plenum Cover, everything else is the same.
|
1 Attachment(s)
https://www.cmoc.ca/attachment.php?a...ine=1415036700
- 4.6L aluminum block, 3.572 bore/3.543 stroke - Kellogg Crank - Kooks Custom Long Tubes and X-Pipe - Trickflow 44cc 2V Twisted Wedge Heads (custom valve work) - Logan custom sheetmetal intake (with nitrous bosses) - Comp Cams and extra set of Mod Head Shop Cams - Meziere electric water pump - Aeromotive Fuel Rails - 39 lb Injectors - ARP Fasteners - Aluminum Flywheel - MSD Wires - Moroso Oil Pan - Windage Tray Wish I could afford it! I bought my lump of poo from him but I know that this engine is a good runner. |
1 Attachment(s)
Some nice stuff guys!!!
That's one serious build thetrousertrout My little GT's heart... https://www.cmoc.ca/attachment.php?a...ine=1415067211 |
Looking super clean ^^
|
Damn 1LOW03GT That is an incredibly sanitary New Edge engine bay! What do you have for mods on it? Also what are the extended and closed lengths of the hood struts? I wouldn't mind makeing that mod for myself.
|
6 Attachment(s)
Here you go.
331 in a Dart block. t70 turbo. |
That is sweet Outrgus!!!
|
Originally Posted by Outrgus
(Post 196653)
Here you go.
331 in a Dart block. t70 turbo. |
Yes, Steve did the plumbing.
Thanks for the complements. |
Originally Posted by thetrousertrout
(Post 196650)
Damn 1LOW03GT That is an incredibly sanitary New Edge engine bay! What do you have for mods on it? Also what are the extended and closed lengths of the hood struts? I wouldn't mind makeing that mod for myself.
Engine mods are VT engines stage II cams (now Cushman cams), comp valve springs, '01 Bullitt ported intake, Cobra throttle body,Steeda pulleys, JLT cai, which all flows threw a bassani catted x pipe and flowmaster 40 series "originals" catback, and SCT curtom dyno tune. Works pretty good. As for the hood struts, not sure on the specs, but i can let you know a little later. |
Originally Posted by Outrgus
(Post 196653)
Here you go.
331 in a Dart block. t70 turbo. |
Originally Posted by thetrousertrout
(Post 196650)
Damn 1LOW03GT That is an incredibly sanitary New Edge engine bay! What do you have for mods on it? Also what are the extended and closed lengths of the hood struts? I wouldn't mind makeing that mod for myself.
Open it's 20 1/2 inches Closed it's roughly 13 1/2 inches |
Originally Posted by 1LOW03GT
(Post 196702)
Sorry i'm a little late on the response for the hood struts. Finally brought my measuring tape home tonight.
Open it's 20 1/2 inches Closed it's roughly 13 1/2 inches Strong arm part number 4279 should work great for this application 500mm extended (19.6") 300mm compressed (11.8") approx 95 foot pounds to collapse. Ball end on both ends so finding attaching hardware will be extremely easy at wrecking yards! Should be able to find them for around $25 each locally or about $10-15 each on E-bay. Strong arm is sold at Canadian Tire for ease of locating them. Looks like I have another project for my car! |
1 Attachment(s)
|
Very Nice.
|
5 Attachment(s)
I got to play with a really nice set of Pro Stock Lee Shepherd heads today, Not Ford items but really cool all the same. These are definitely old school cool!
https://www.cmoc.ca/attachment.php?a...ine=1416289321 https://www.cmoc.ca/attachment.php?a...ine=1416289321 https://www.cmoc.ca/attachment.php?a...ine=1416289321 https://www.cmoc.ca/attachment.php?a...ine=1416289321 https://www.cmoc.ca/attachment.php?a...ine=1416289321 |
That is old school cool alright, awesome.
|
All times are GMT -5. The time now is 08:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands