performance manifold on ebay?
 

want to know if you guys know about anything like this?.. is it true about the power gains?


http://cgi.ebay.ca/96-98-Mustang-GT-...QQcmdZViewItem

IMO....the only benefit to that one over your stocker is the aluminum crossover piece

I'd say their dreaming about HP gains

Yes, the gains from that intake would be minimal, the only good intake for 4.6s is the P-51 and even that one would be lucky to make 15hp on your car.

x 2 for the p-51thumb:

The PI intake from a '99+ is more improved then the '96 to '98,and guys with those years of stangs have seen a LITTLE bit of a gain when going to the PI intake.If you could find one cheap/used,yeah worth it,and a bonus would be the aluminum coolant cross over.But if you have plans down the road,save your bucks for sure,and don't even bother! thumb:

X3 for the P51 drool:

The thing with the P51 is that you really need to have head work,a nice set of cams,and full exhaust to benefit from it.Other wise it will only hurt your performance as it stands.That intake is designed to run/work in higher rpms,and you will lose your lower rpm torque.
People don't realise that the stock intake is really good,it's runners are smooth due to being plastis,being plastic it doesn't trap heat,and the runners are tuned for lower rpm range,that thing that helps out your torque,which the 4.6 lack already.This is probably why the aftermarket is having a hard time coming out with a street intake that will give you some gains.All the intakes on the market right now,minus the Bullitt intake are designed for higher end rpm hp.Now,if you are patient,trick flow does have an intake coming out that is similar to the Bullit in design,and it might be the answer.
What you need to do is figure out what you really want to build,a race car,or a street car.Only then from there,you can decide on intakes.

Well if Ponyryde would hurry up and get a p51 i could have his bullit gear j/k LOLthumb:

Ahem, it's Ponyryd-no e, lol. If you get a Bullitt intake, you're best off to have it ported as the gains are minimal as cast. If you're looking for one, talk to 1LOW03GT as I believe he just got one for his ride and has probably researched the shait out of 4.6 intakes.

LOL,my ported Bullitt Intake ain't going no where but on my sled of a GT teeth: !! smokejump:

LOL ooooooo sorry about the "E"
Anyhow i was just messin with ya im not lookin for an intake right this second too much other stuff on the go but i thought you should upgrade your bullit then there one more on the market LOL
And if low03 has got a bullit ill have to get a P51 j/k LOLrockon:

Your still gonna need more blah: LMAO!!!! rockon:

No i wont ! bowdown:

You'll have to prove it. bonkers: :LOL:

Ya know what id drive half way across the country to race you my friend!
then well go get pissed after LOLthumb:
who says chivalry is dead!rockon:

rockon: Dude,i'm up for some good ol' cold "POPS". :cheers:
That in itself makes us all a winner!!! Or the loser to whom ever passes out first smokejump:

LOL just like rocky balboa and Apollo creed LMAOthumb:

Agreed. rockon: