5.0L Ford Mustang 5.0L discussion area for heads, rebuilding, tuning, idle issues and all other modifications and performance parts.

How fast can a stock 5.0 go

Old Nov 30, 2011 | 01:25 AM
  #41  
tailites's Avatar
CMOC Rookie
 
Joined: Nov 2011
Posts: 63
From: under my car mostly...
Originally Posted by StealthStang
The quickest I got my car full weight was 13.0, i must be doing something wrong
nope...lots go high twelves so your close...shifting, tires, combo, has a lot to do with it
whats your combo now?

Last edited by tailites; Nov 30, 2011 at 01:42 AM.
Old Nov 30, 2011 | 02:42 PM
  #42  
SNAKEBITE's Avatar
I am the post KING
 
Joined: Feb 2005
Posts: 15,244
From: Calgary
13.0 ain't exactly slow
Old Nov 30, 2011 | 06:13 PM
  #43  
StealthStang's Avatar
CMOC Addict
 
Joined: Sep 2010
Posts: 855
From: niagara
Stock motor except b cam C4 w/3000 stall and t brake, 4:10's w/stock possi, drag springs drag shocks and drag struts, stock boxed rear control arms upper and lower. I am not complaining as the car is in full weight still spinning off the line with 275/50/15 Mickey Thompson et streets drag radials. I have the stock fuel injusters and FPR also
Old Nov 30, 2011 | 07:23 PM
  #44  
streetglyde's Avatar
CMOC Veteran
iTrader: (1)
 
Joined: Dec 2009
Posts: 254
From: hamilton
Stall is way too low ...need at least a 5000 302 make nothing for torque need to buzz the hell out of it put at least a 456 gear or more 513 itll wake up
Old Nov 30, 2011 | 07:25 PM
  #45  
streetglyde's Avatar
CMOC Veteran
iTrader: (1)
 
Joined: Dec 2009
Posts: 254
From: hamilton
Originally Posted by SNAKEBITE
13.0 ain't exactly slow
Yes it is ..
Old Nov 30, 2011 | 08:26 PM
  #46  
tailites's Avatar
CMOC Rookie
 
Joined: Nov 2011
Posts: 63
From: under my car mostly...
Originally Posted by streetglyde
Stall is way too low ...need at least a 5000 302 make nothing for torque need to buzz the hell out of it put at least a 456 gear or more 513 itll wake up
on what hes runnin hes goin to run out of gear at the stripe with 456...no?
Old Nov 30, 2011 | 08:31 PM
  #47  
tailites's Avatar
CMOC Rookie
 
Joined: Nov 2011
Posts: 63
From: under my car mostly...
Originally Posted by StealthStang
Stock motor except b cam C4 w/3000 stall and t brake, 4:10's w/stock possi, drag springs drag shocks and drag struts, stock boxed rear control arms upper and lower. I am not complaining as the car is in full weight still spinning off the line with 275/50/15 Mickey Thompson et streets drag radials. I have the stock fuel injusters and FPR also
boxed lowers I would say not the best...use a good aftermarket LCA
the rubber bushings are too soft in stock
Old Nov 30, 2011 | 08:49 PM
  #48  
streetglyde's Avatar
CMOC Veteran
iTrader: (1)
 
Joined: Dec 2009
Posts: 254
From: hamilton
Originally Posted by tailites
on what hes runnin hes goin to run out of gear at the stripe with 456...no?
28 tall tire 6500 shifts I forget what the redline line in a stock motor is ? Whats and injuster . :
You are running a 410 gear now what does it cross the line at ? what rpm
Old Nov 30, 2011 | 08:54 PM
  #49  
StealthStang's Avatar
CMOC Addict
 
Joined: Sep 2010
Posts: 855
From: niagara
Lmao I do run out gear, I never seen streetglyd's car run. What have you ran with it
he he he I may be slow but I am doing my best with a mostly stock engine. 13.0 na and 11.7 with spray is about what my setup is supposed to run. I will agree a 3000 stall is way to low but its all I got for now
Old Nov 30, 2011 | 08:56 PM
  #50  
StealthStang's Avatar
CMOC Addict
 
Joined: Sep 2010
Posts: 855
From: niagara
6000 is what its running through the traps bouncing off limiter


All times are GMT -5. The time now is 05:10 AM.