HI, I need help running all the vacuum lines from a '88 5.0 litre Mustang into a FFR Cobra kit...the air pump has been removed. I found a few diagrams, but they are still too complicated.... I am uncertain which sensors do what, etc....any help would be appreciated.

 

I just finished my engine so I will try to remember what I did. Coming out under the front of the intake is the line for the vent valve. Out the back is a big one for the vacuum tree,one for the fuel pressure reg,and one to the EGR control valve and the TAD &TAB valves. Off the tree one goes to the brake booster,another to the cruse control, and another to the heater and vac res.in right fender. If you removed the air pump you don't need the TAD&TAB valves.good luck