Canadian Mustang Owners Club - Ford Mustang Forums
Share Your Pictures with Our Community. Upload Now
IMG124
IMG124
0 2012/06/14 18:31:28
IMG125
IMG125
0 2012/06/14 18:31:28
roush r2300
roush r2300
0 2012/06/03 20:32:19
2012 06 03 16.45.07
2012 06 03 16.45.07
0 2012/06/03 20:32:19
2012 06 03 16.44.22
2012 06 03 16.44.22
0 2012/06/03 20:32:19
2012 06 03 16.44.56
2012 06 03 16.44.56
0 2012/06/03 20:25:16
2012 06 03 16.44.39
2012 06 03 16.44.39
0 2012/06/03 20:25:16
2012 06 03 16.44.29
2012 06 03 16.44.29
0 2012/06/03 20:25:16
2012 06 03 16.44.04
2012 06 03 16.44.04
0 2012/06/03 20:22:17
2012 06 03 16.46.25
2012 06 03 16.46.25
0 2012/06/03 20:22:17
2012 06 03 16.46.03
2012 06 03 16.46.03
0 2012/06/03 20:22:17
IMG00063 20120420 1802
IMG00063 20120420 1802
0 2012/05/30 19:42:53
Advertisement
IMG00064 20120420 1802
IMG00064 20120420 1802
0 2012/05/30 19:42:53
IMG00065 20120420 1803
IMG00065 20120420 1803
0 2012/05/30 19:42:53
SAM 3295
SAM 3295
0 2012/05/25 20:30:23
SAM 3291
SAM 3291
0 2012/05/25 20:25:28
Rear clearance on the coilovers.
Rear clearance on the coilovers.
0 2012/05/18 13:04:02
SN95 rearend with QA1 adjustable shocks, UPR Coilovers, Springs are 150Lb.
SN95 rearend with QA1 adjustable shocks, UPR Coilovers, Springs are 150Lb.
0 2012/05/18 13:04:02
What's a custom car without vanity plates :) I was surprised it was available due to the number of modular powered fox's around.
What's a custom car without vanity plates :) I was surprised it was available due to the number of modular powered fox's around.
0 2012/05/18 13:04:02
2004 Aviator heads (same a mach cobra, marauder etc) I swapped the intake cams to 96 Cobra. they have almost 20 degrees more duration that the stock 04 Cobra cams. All exhaust cams were identical.
2004 Aviator heads (same a mach cobra, marauder etc) I swapped the intake cams to 96 Cobra. they have almost 20 degrees more duration that the stock 04 Cobra cams. All exhaust cams were identical.
0 2012/05/18 12:59:50
Car waiting for the wiring harness from RJM. Taking forever.
Car waiting for the wiring harness from RJM. Taking forever.
0 2012/05/18 12:59:50
17x9.5" Billet Street. Because of the SN95 rear a 7" offset is required to allow the rims to fit.
17x9.5" Billet Street. Because of the SN95 rear a 7" offset is required to allow the rims to fit.
0 2012/05/18 12:59:50
Pretty much complete in this picture. Just finishing up the cooling system.
Pretty much complete in this picture. Just finishing up the cooling system.
0 2012/05/18 12:56:47
Started it life an an Aviator motor. Swapped to a 2004 Mach 1 intake, and 96 Cobra cams.
Started it life an an Aviator motor. Swapped to a 2004 Mach 1 intake, and 96 Cobra cams.
0 2012/05/18 12:56:47
T-56 out of a 2004 Cobra
T-56 out of a 2004 Cobra
0 2012/05/18 12:56:47
SDC10262 (Large)
SDC10262 (Large)
0 2012/05/16 06:46:56
SDC10264 (Large)
SDC10264 (Large)
0 2012/05/16 06:46:56
SDC10267 (Large)
SDC10267 (Large)
0 2012/05/16 06:46:56
IMG 1130
IMG 1130
0 2012/05/04 16:08:24
IMG 1147
IMG 1147
0 2012/05/04 16:08:24
IMG 1283
IMG 1283
0 2012/05/04 16:08:24
IMG 0684
IMG 0684
0 2012/05/04 16:03:19
Advertisement